User Manual

<7. Errors and Warnings>
7-3
IM 01C50T02-01E
Table 7.2 Warnings
Code
Displayed
on LCD
Indication of DEVICE_
STATUS_#
Cause Remedy
AL100 AI1 in O/S mode The actual mode of the AI1 block
is O/S.
See Table 7.3.
AL101 AI1 in MAN mode The actual mode of the AI1 block
is Man.
Set the target mode of AI1 to Auto.
AL102 AI1 in Simulate Active SIMULATE of the AI1 block is
Active.
Set SIMULATE of AI1 to Disabled.
AL103 AI1 Non-Scheduled Execution of AI1 is not scheduled. Include AI1 in the schedule (by setting
FB_START_ENTRY.#.)
AL104 AI2 in O/S mode The actual mode of the AI2 block
is O/S.
See Table 7.3.
AL105 AI2 in MAN mode The actual mode of the AI2 block
is Man.
Set the target mode of AI2 to Auto.
AL106 AI2 in Simulate active SIMULATE of the AI2 block is
Active.
Set SIMULATE of AI2 to Disabled.
AL108 AI3 in O/S mode The actual mode of the AI3 block
is O/S.
See Table 7.3.
AL109 AI3 in MAN mode The actual mode of the AI3 block
is Man.
Set the target mode of AI3 to Auto.
AL110 AI3 in Simulate active SIMULATE of the AI3 block is
Active.
Set SIMULATE of AI3 to Disabled.
AL112 AI4 in O/S mode The actual mode of the AI4 block
is O/S.
See Table 7.3.
AL113 AI4 in MAN mode The actual mode of the AI4 block
is Man.
Set the target mode of AI4 to Auto.
AL114 AI4 in Simulate active SIMULATE of the AI4 block is
Active.
Set SIMULATE of AI4 to Disabled.
AL116 DI1 in O/S mode The actual mode of the DI1 block
is O/S.
See Table 7.3.
AL117 DI1 in MAN mode The actual mode of the DI1 block
is Man.
Set the target mode of DI1 to Auto.
AL118 DI1 in Simulate active SIMULATE_D of the DI1 block is
Active.
Set SIMULATE_D of DI1 to Disabled.
AL120 DI2 in O/S mode The actual mode of the DI2 block
is O/S.
See Table 7.3.
AL121 DI2 in MAN mode The actual mode of the DI2 block
is Man.
Set the target mode of DI2 to Auto.
AL122 DI2 in Simulate active SIMULATE_D of the DI2 block is
Active.
Set SIMULATE_D of DI2 to Disabled.
AL124 DI3 in O/S mode The actual mode of the DI3 block
is O/S.
See Table 7.3.
AL125 DI3 in MAN_mode The actual mode of the DI3 block
is Man.
Set the target mode of DI3 to Auto.
AL126 DI3 in Simulate active SIMULATE_D of the DI3 block is
Active.
Set SIMULATE_D of DI3 to Disabled.
AL128 DI4 in O/S mode The actual mode of the DI4 block
is O/S.
See Table 7.3.
AL129 DI4 in MAN mode The actual mode of the DI4 block
is Man.
Set the target mode of DI4 to Auto.
AL130 DI4 in Simulate active SIMULATE_D of the DI4 block is
Active.
Set SIMULATE_D of DI4 to Disabled.
AL132 PID1 in O/S The actual mode of the PID1 block
is O/S.
See Table 7.3.
AL140 PID1 in Bypass active The bypass action for PID1 is
active.
Reset BYPASS of PID1 to off.
AL142 PID2 in O/S mode The actual mode of the PID2 block
is O/S.
See Table 7.3.