User guide

4. PARAMETERS LISTS
IM 01C50T01-01E
4-1
4. PARAMETERS LISTS
Initial setting value marked with “ * ” is as of specified upon ordering.
Item Selection/ Setting Range Initial Setting
HART
Communicator
Up to 8 characters
Up to 8 characters
Up to 16 characters
Up to 32 characters
mm/dd/yy
0 to 16777215
°C, K,°F, o r °R (see note 1)
Set the calibration range using the keypad.
Value for 4 and 20 mA signal is set with actual input
applied.
0 to 99 seconds.
0 to 99%.
“Sensor1”, “Terminal Temperature(term)” or “Sensor1-
Te r m”.
For YTA320, above plus “Sensor2”, “Sensor2-Term”,
“Average” or “Differential” temperature.
Sensor1-Sensor2 or Sensor2-Sensor1.
Specify input type.
2, 3 or 4 wire.
°C, K, °F, o r °R. (See note 1).
Enable or disable
°C, K, °F, o r °R. (See note 1).
Internal CJC, Constant CJC
-10000 to 10000
Specify input type.
2, 3 or 4 wire.
°C, K, °F, o r °R. (See note 1).
Enable or disable
Enables/disables sensor backup mode.
Shows the backup status. (Waiting or Start.)
Enables the recovery to sensor1 during backup
operation.
Ta g
Tag Ex
Descriptor
Message
Date
Snsr1(2)
snsr s/n
PV unit
(SV,TV,4V)
LRV/URV
Apply values
PV Damp
(SV,TV,4V)
PV Damp point
PV is
(SV,TV,4V)
Diff direction
(YTA320 only)
Snsr1 Type
Snsr1 Wire
Snsr1 unit
Snsr1 Match
Enbl (Note 3)
Te r m Unit
CJC Select
CNST CJC
Temp
Snsr2 Type
Snsr2 Wire
Snsr2 unit
Snsr2 Match
Enbl (Note 2)
Snsr Bkup
Bkup state&Cntl
Bkup Return
Snsr1
Memory
Process
Variable
Sensor1
Configuration
Te r minal
Temperature
Sensor2
Configuration
(YTA320 only)
Engineering Unit
Range
Damping time
constant
Damping holding
point
Variable
mapping
Differential
Direciton
Sensor1 type
Sensor1 wire
Sensor1 unit
Enable sensor
match function
Te r minal Temp.
unit
CJC Function
Sensor2 type
Sensor2 wire
Sensor2 unit
Enable sensor
match function
Sensor Backup
Function
T0401_1.EPS
Note 1: °F and °R are available only when option code /D2 is specified.
Note 2: Appears only when Sensor Matching Function(/CM1) is specified.
—*
—
—
—
—
—
°C*
LRV:0*
URV:100*
—
2 s
2%
PV:
Sensor1
SV(YTA320):
Sensor2
Sensor1-Sensor2
Pt100*
3 wire*
°C*
disable
°C*
Internal CJC
0
Pt100*
3 wire*
°C*
disable
disable
—
—