Instruction Manual

IM 01C50T03-01E

4-1

4. SELF-DIAGNOSTICS

The temperature transmitter continually monitors its

own performance during normal operation. If an error

occurs, it displays and records the error to the logging

parameters, and with the integral indicator, an error

code corresponding to the error is displayed.

4.1 Error Message

An error message is displayed on the BT200 when

there is a problem with functions. The error message

can be checked with the parameter number of each

item ■60:SELF CHECK. In addition, the error code is

displayed when the transmitter is equipped with the

integral indicator. See Table 4.1 below for the error

contents corresponding to the error messages, error

codes, and their countermeasures.

FEED PRNT ESC

HOME

A60:SELF CHECK

ERROR

● Example: Checking by the BT200

F0401.EPS

DATA DIAG PRNT ESC

PARAM

A10:PV

125.06 degC

A11:mA of RANGE

16.51 mV

A12:% of RANGE

50.25 %

1. Press [F2] (DIAG) to go to the

diagnostics panel

(A60: SELF CHECK).

2. Error messages are shown

when the error occurs.

F0402.EPS

● Example: Checking by the integral indicator

Error codes are shown when the errors occur.

Note : To display the error code, set M55: Err-NO DISP to SHOW.