Instruction Manual
<9. Parameter Summary>
9-3
IM 01C50E01-01EN
Object
ID
Attribute
ID
Label Description Default value Handling
1.
UAPMO
(continued)
123 Faults process
inuence Alert
*2
The On/Off or priority for Faults process inuence Alert can be
set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for YTA.
1. TRUE
2. 15
W
124 Faults non-
compliance
Alert
*2
The On/Off or priority for Faults non-compliance Alert can be
set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for YTA.
1. TRUE
2. 15
W
125 Other faults
Alert
*2
The On/Off or priority for Other faults Alert can be set.
1. On/Off setting
0 = FALSE, 255 =TRUE
2. Alert report priority: 0 to 15
Not available for YTA.
1. TRUE
2. 15
W
2.
UDO
block
2 DESCRIPTION Indicates the version and model information of the downloaded
data.
--- R
3 STATE Indicates the present transition state. --- R
5 MAX_BLOCK_
SIZE
Maximum block size. This value is smaller than the maximum
data size of APDU.
--- R
14 LAST_BLOCK_
DOWNLOADED
Indicates the last downloaded block number. 0 means that no
block has been downloaded.
--- R
16 ERROR_CODE Indicates the error codes for DLError.
0 = noError
1 = Timeout
2 = ClientAbout
64 = Apply failure
--- R
3.
CO
block
1 REVISION Indicates the version level of COMM_ENDPOINT, etc. --- R
2 COMM_
ENDPOINT
Indicates the Endpoint information. The following shows the
components.
1. Network address of remote endpoint
2. Transport layer port at remote endpoint
3. Object ID at remote endpoint
4. Stale data limit
5. Data publication period
6. Ideal publication phase
7. PublishAutoRetransmit
8. Conguration status
--- W
3 COMM_
CONTRACT
Indicates the Contract information. The following shows the
components.
1. ContractID
2. Contract_Status
3. Actual_Phase
--- R
4 PUB_ITEM_MAX Maximum PUB_ITEM value --- R
5 PUB_ITEM_NUM PUB_ITEM number --- R
6 PUB_ITEM Indicates the PUB_ITEM information. The following shows the
components.
1. ObjectID
2. AttributeID
3. AttributeIndex
4. Size
--- W