Instruction Manual

<7. Setting Parameters>
7-3
IM 01C50E01-01EN
7.3.2 Function Block and Menu Tree
(1) Function Block
The function of this transmitter is shown below. A specic function might not be able to be used according to
the eld wireless conguration tool used. When the eld wireless conguration tool of our recommendation is
used, the software attached to the Field Wireless Integrated Gateway is necessary for setting the dotted line
part.
Refer to Subsection 8.2 “Calibration Instruments Selection” for the eld wireless conguration tool of our
recommendation.
(a) Integral antenna type: single sensor input (Amplier housing code 7)
• Configuration
• Diagnostics/Alerts
• Power Status
• Identification
(UAPMO)
(UDO)
• Configurationn
• Others
(CO)
• UAPMO
• UDO
• CO
• TRANSDUCER
• AI1 Temp
Online Menu
• UAP Option
• Hardware Write Protect
• Static Revision
• Reset Energy Left
• Radio Silence
(Configuration)
• Diagnostic Status
• Diagnostic Status Detail1,
Diagnostic Status Detail2
• Diagnostic Switch
• Diagnostic Configuration
(Diagnostics/Alerts)
• Version Revision
• CTS Version
• ITS Version
• Identification Number
(Identification)
(APP Download)
(Configuration)
(Others)
(COMM_ENDPOINT)
(COMM_CONTRACT)
(PUB_ITEM)
F0702-1.ai
• Energy Left
• Power Supply Status
(Power Status)
• APP Download
• DESCRIPTION
• STATE
• MAX_BLOCK_SIZE
• LAST_BLOCK_DOWNLOADED
• ERRER_CODE
• COMM_ENDPOINT
• COMM_CONTRACT
• PUB_ITEM_MAX
• PUB_ITEM_NUM
• PUB_ITEM
• REVISION
• Network address of remote endpoint
• Transport layer port at remote endpoint
• Object ID at remote endpoint
• Stale data limit
• Data publication period
• Ideal publication phase
• PublishAutoRetransmit
• Configuration status
• ContractID
• Contract_Status
• Actual_Phase
• ObjectID
• AttributeID
• AttributeIndex
• Size