User Manual

3-7
IM 04L21B01-17EN
Commands
1
2
3
4
5
6
App
Index
Basic Setting Commands
To apply settings that you have changed using the basic setting commands, you need
to save the settings using the YE or XE command. Be sure to save the settings before
you change the execution mode from the basic setting mode to the operation mode.
Otherwise, the new settings will not be applied.
The settings that are returned in response to a query in basic setting mode contain
the new settings even if they have not been saved. However, the new settings are
not applied unless they are saved. If the settings are cleared or if you change the
execution mode from basic setting mode to operation mode before saving the settings,
the settings that are returned in the response to a query contain the settings that were
in use before they were changed.
Note
The settings that are changed using the
YA
,
YK
,
RU
,
YQ
,
YS
,
YB
,
YD
,
WS
,
WW
, and
WQ
commands are applied after saving the new settings using the
XE
command and restarting
the FX.
When you execute the
YE
or
YO
command, communication is disconnected. Commands
listed after the YO or YE command are ignored.
Command
Name
Function Execution Mode Administrator User Page
WU Sets the environment
Basic setting mode
Yes No 3-34
WO Sets alarm and DO settings
Basic setting mode
Yes No 3-36
WH Sets alarm hysteresis
Basic setting mode
Yes No 3-36
XV Sets the scan interval and A/D integration time
Basic setting mode
Yes No 3-37
XB Sets burnout detection
Basic setting mode
Yes No 3-37
XJ Sets RJC
Basic setting mode
Yes No 3-37
XM Sets the memory sampling condition
Basic setting mode
Yes No 3-37
RF Sets the key lock
Basic setting mode
Yes No 3-37
RN Sets basic login
Basic setting mode
Yes No 3-38
RP Sets user limitations
Basic setting mode
Yes No 3-38
RO Sets the type of report and when to create reports (/M1, /PM1, and
/PWR1 options)
Basic setting mode
Yes No 3-38
RM Sets a report channel (/M1, /PM1, and /PWR1 options)
Basic setting mode
Yes No 3-39
XG Sets the time zone
Basic setting mode
Yes No 3-39
XN Sets the date format
Basic setting mode
Yes No 3-39
YB Sets host information (/C7 option)
Basic setting mode
Yes No 3-39
YD Sets network parameters (/C7 option)
Basic setting mode
Yes No 3-40
YA Sets the IP address, subnet mask, and default gateway (/C7 option)
Basic setting mode
Yes No 3-40
YK Sets keepalive (/C7 option)
Basic setting mode
Yes No 3-40
RU Sets DNS parameters (/C7 option)
Basic setting mode
Yes No 3-40
WS Sets a server (/C7 option)
Basic setting mode
Yes No 3-40
WW Sets web page parameters (/C7 option)
Basic setting mode
Yes No 3-40
YQ Sets the communication timeout (/C7 option)
Basic setting mode
Yes No 3-41
YT Sets the FTP transfer timing (/C7 option)
Basic setting mode
Yes No 3-41
YU Sets what kind of information to send using e-mail (/C7 option)
Basic setting mode
Yes No 3-41
YV Sets an e-mail recipient address (/C7 option)
Basic setting mode
Yes No 3-42
YW Sets the e-mail sender address (/C7 option)
Basic setting mode
Yes No 3-42
YX Sets the e-mail SMTP server name (/C7 option)
Basic setting mode
Yes No 3-42
YJ Sets the Modbus client’s destination server (/C7 option)
Basic setting mode
Yes No 3-42
YP Sets basic Modbus client settings (/C7 option)
Basic setting mode
Yes No 3-43
YR Sets the Modbus client’s transmit command (/C7 option)
Basic setting mode
Yes No 3-43
WB Sets SNTP client parameters (/C7 option)
Basic setting mode
Yes No 3-43
WC Sets the SNTP operation that is performed when memory start is
executed (/C7 option)
Basic setting mode
Yes No 3-44
YS Sets the serial interface (/C2 and /C3 options)
Basic setting mode
Yes No 3-44
YL Sets the operation of the Modbus master function (/C2 and /C3
options)
Basic setting mode
Yes No 3-44
3.2 List of Commands