User Manual

3-4
IM 04L21B01-17EN
3.2 List of Commands
FX Execution Modes
The FX has two execution modes. If you attempt to execute a command in an execution
mode that is different from the mode that the command is specified for, a syntax error
will occur. Use the DS command to switch to the appropriate execution mode, and then
execute the command. Queries can be executed in either mode.
• Basic setting mode
This mode is used to change the settings. In this mode, measurements and
computations are stopped.
• Operation mode
As a general rule, commands other than those used in the basic setting mode
described above are used in this mode.
Administrator and User
The distinction between administrators and normal users indicates the user levels set
through the FX Ethernet login function. “Administrator” refers to a “system administrator”
or “admin.” “User” refers to a “normal user” or “user.” For details, see section 1.1.
“Yes” and “No” in the table indicate the following:
Yes: The command can be used.
No: The command cannot be used.
Setting Commands
Command
Name
Function Execution Mode Administrator User Page
SR Sets an input range Operation mode Yes No 3-12
SO Sets an expression (/M1, /PM1, and /PWR1 options) Operation mode Yes No 3-14
TJ Sets memory sampling Operation mode Yes No 3-14
SA Sets an alarm Operation mode Yes No 3-15
SW Sets the trend interval and auto save interval Operation mode Yes No 3-16
TW Sets the secondary trend interval Operation mode Yes No 3-16
TE Sets sampling conditions for event data Operation mode Yes No 3-17
SZ Sets a zone Operation mode Yes No 3-17
SP Sets a partial expanded display Operation mode Yes No 3-17
ST Sets a tag Operation mode Yes No 3-18
SX Sets a display group Operation mode Yes No 3-18
SL Sets a trip line Operation mode Yes No 3-18
SG Sets a message Operation mode Yes No 3-18
TH Sets the directory on the external storage medium for saving data Operation mode Yes No 3-18
TZ Sets a file header Operation mode Yes No 3-18
TF Sets a data file name Operation mode Yes No 3-19
SD Sets the date and time Operation mode Yes No 3-19
TD Sets daylight saving time Operation mode Yes No 3-19
TT Sets the trend display Operation mode Yes No 3-19
SE Sets the line width and the number of grid sections to use on the
trend graph
Operation mode Yes No 3-20
TB Sets the bar graph display Operation mode Yes No 3-20
SB Sets the bar graph for a channel Operation mode Yes No 3-20
TN Sets a scale Operation mode Yes No 3-20
SV Sets a measurement channel’s moving average Operation mode Yes No 3-20
SC Sets a channel display color Operation mode Yes No 3-20
TA Sets an alarm point mark Operation mode Yes No 3-20
TG Sets a color scale band Operation mode Yes No 3-21
SQ Sets the LCD brightness and the screen backlight saver Operation mode Yes No 3-21
TC Sets the background color Operation mode Yes No 3-21
TP Sets automatic display group switching Operation mode Yes No 3-21
TR Sets the automatic monitor return function Operation mode Yes No 3-22