User Manual

1-28
IM 04L21B01-17EN
Page Type
Monitor
Configure the monitor page. You can carry out the following operations on the monitor
page.
Display the alarm summary
Display the measured and computed values of all channels
Display logs (message summary, error log, etc.)
For screen examples, see “Monitoring with a Browser” in this section.
Operator
Set the operator page. The following operations can be carried out in addition to the
functions available on the monitor page.
Switch the operation screen
Control the FX’s DISP/ENTER key and arrow keys
Write messages
For screen examples, see “Monitoring with a Browser” in this section.
Setting the monitor page
Page type
Select Monitor.
Setting On/Off
To display the monitor page on a browser, select On; otherwise, select Off.
Access control
To use access control, select Admin (for an administrator) or User.
You must enter a user name and password to display the monitor page. Set the user
name and password through the Login item. For details, see the FX1000 User’s
Manual, IM 04L21B01-01EN.
Setting the operator page
Page type
Select Operator.
On/Off
To display the operator page in the browser, select On. Otherwise, select Off.
Access control
To use access control, select Admin (for an administrator). You must enter a user
name and password to display the operator page. Set the user name and password
through the Login item. See the FX1000 User’s Manual, IM 04L21B01-01EN.
Command input
To use message write commands, select On. Otherwise, select Off.
1.5 Monitoring the FX on a PC Browser