User Manual

4-29

IM 04L21B01-17EN

Responses

App

Index

4.3 Output Format of Binary Data

This section describes the output format of the binary data.

For information on other binary data, see section 4.1.

• Instantaneous data (measured/computed) and FIFO data

• Configured channel information data

• Configured alarm information data

• Manual sampled data

• Report data

The measured data and computed data are output using signed 16-bit integer and signed

32-bit integer, respectively.

• When Using a Channel That Is Not Set to Log Scale (/LG1 option)

These integers can be understood as physical values by adding the decimal point and

the unit. The decimal place can be determined using the FE command.

Typical Examples to Obtain Physical Values from Binary Data

Binary Value Decimal Position Code Physical Value (Measured Value)

10000 0 10000

10000 1 1000.0

10000 2 100.00

10000 3 10.000

10000 4 1.0000

• When Using a Channel That Is Set to Log Scale (/LG1 option)

Logarithmic values are output. See the next page.

Note

The “

CRLF

” used in this section denotes carriage return line feed.