User Manual

4-10
IM 04L21B01-17EN
Communication Log
• The FL command is used to output the data.
• A log of setting/basic setting/output commands and responses is output. Up to 200
logs are retained. Logs that exceed 200 are cleared from the oldest data.
• Syntax
EACRLF
yy/mo/dd_hh:mm:ss_n_uuu···ufd_mmm···mCRLF
······································
ENCRLF
yy
Year (
00
to
99
)
mo
Month (
01
to
12
)
dd
Day (
01
to
31
)
hh
Hour (
00
to
23
)
mm
Minute (
00
to
59
)
ss
Second (
00
to
59
)
n
Connection ID. A number used to identify the user that is connected.
0:
Serial
1
to
3:
Ethernet
uuu···u
User name (up to 20 characters)
f
Multiple command flag
Space: Single
*: Multiple
(If multiple commands are separated by sub delimiters and output at
once, “*” is displayed. The multiple commands are divided at each sub
delimiter and stored as individual logs (1 log for 1 command and 1 log
for 1 response.)
d
Input/Output
>:
Input
<:
Output
mmm···m
Message (up to 20 characters)
• The communication log contains only the error number and not the
error message section.
• Normally, the transfer data are transmitted as they are, but in some
cases, a special message is output. The special messages are
shown below.
Reception
(Overlength):
Command length exceeded.
(Overnumber):
Number of commands exceeded.
(Serialerror):
Received an error character through serial
communications.
4.2 Output Format of Text Data