User Manual

3-53
IM 04L21B01-17EN
Commands
1
2
3
4
5
6
App
Index
eth Outputs Ethernet statistics
Syntax
 eth<terminator>
Example
eth
EA
11/06/0912:34:56
EthernetStatistics
Name InPkt InErr OutPkt OutErr 16Coll
lo0 0  0  0 0  0
lan0 74  0  64 0  0
EN
help Outputs help
Syntax
 help[,p1]<terminator>
p1
Command name
(close, con, eth, help, net, quit)
Example
help
EA
con  -echoconnectioninformation
eth  -echoethernetinformation
help  -echohelp
net  -echonetworkstatus
quit  -closethisconnection
EN
net Outputs network statistics
Syntax
 net<terminator>
Example
net
EA
11/06/0912:34:56
NetworkStatus
APP:powerontime=11/06/0812:34:56
APP:applalive=disable
APP:genetry=0
APP:geneok=0
APP:genedrops=0
APP:diagtry=1
APP:diagok=1
APP:diagdrops=0
APP:ftpstry=0
APP:ftpsok=0
APP:ftpsdrops=0
TCP:keepalive=30s
TCP:connects=14
TCP:closed=0
TCP:timeoutdrop=0
TCP:keepdrops=0
TCP:sndtotal=53
TCP:sndbyte=0
TCP:sndrexmitpack=0
TCP:sndrexmitbyte=1
TCP:rcvtotal=0
TCP:rcvbyte=0
DLC:16collisions=0
EN
TCP:keepalive
Keepalive check cycle
TCP:connects
Total number of connections established
TCP:closed
Total number of closed connections
TCP:timeoutdrop
This is the total number of closed connections
due to TCP retransmission timeout. When
the transmitted packet (the unit of data that
was transmitted) is not received, the FX
retransmits the packet at a predetermined
time interval. If the packet is not received after
14 retransmissions, a timeout occurs, and the
connection is closed.
TCP:keepdrops
Total number of closed connections due to
TCP keepalive timeout
TCP:sndtotal
Total number of transmitted packets
TCP:sndbyte
Total number of transmitted bytes
TCP:sndrexmitpack
Total number of retransmitted packets
TCP:sndrexmitbyte
Total number of retransmitted bytes
TCP:rcvtotal
Total number of received packets
TCP:rcvbyte
Total number of received bytes
DLC:16collisions
Number of collisions. A collision occurs when
two or more instruments on the network
attempt to transmit simultaneously. The
tendency for collisions to occur increases
when the network is congested. 16 collisions
means that there were 16 consecutive
collisions.
quit Closes the connection to the
instrument that you are operating
Syntax
 quit<terminator>
3.11 Maintenance/Test Commands