User Manual

3-28
IM 04L21B01-17EN
When p2 is set to
INFORMATION
, select
from the items below
ALARM
Alarm summary
MESSAGE
Message summary
MEMORY
Memory summary
MODBUS_CLIENT
Modbus TCP status
display
MODBUS_MASTER
Modbus RTU status
display
RELAY
Relay status display
REPORT
Report display
TO_HISTORY
To the historical
display
TO_HISTORY_D
To historical (display
data)
TO_HISTORY_E
To historical (event
data)
TO_OVERVIEW
To the overview display
SORT_KEY
Sort key switching
SORT_ORDER
Sort order switching
DISP_ITEM
Date/user name
switching
DATA_KIND
Data type switching
DATE/FILE
Date/file name
switching
SELECT_SAVE
Select save
REPORT_CHANNEL
Report channel
display switching
ALL_SAVE
Save all
MANUAL_SAVE
Save manual samples
REPORT_SAVE
Save reports
DATA_SAVE_MODE
Data save mode
COLUMN_BAR
Stacked bar graph
COLUMN_BAR_DISP
Single graph or dual
graph
COLUMN_BAR_SELECT
Selects bar or group
REPORT_GROUP1
to
REPORT_GROUP4
Selects the report
group
DISP_GROUP
Group number display
SEPARATOR
When p2 is set to
LOG
, select from the items
below
LOGIN_LOG
Login log
ERROR_LOG
Error log
COMMU_LOG
Communication log
FTP_LOG
FTP log
WEB_LOG
Web log
MAIL_LOG
E-mail log
SNTP_LOG
SNTP log
DHCP_LOG
DHCP log
MODBUS_LOG
Modbus log
SEPARATOR
Example Display the following items in the following order
on the Trend main menu’s sub menu: SCALE
and DIGITAL.
SMDISP_SUB,TREND,SCALE,DIGITAL
Description • The items that you can set for p3 and the
subsequent parameters vary depending on
p2.
• If you omit parameter p3 and the subsequent
parameters, all menu items are hidden.
• If you specify the same menu item multiple
times, a command error will occur.
• You can specify up to three separators. If you
specify any more, an error will occur.
• You cannot use delimiters to omit parameters
(, ,).
• The SMDISP_SUB? command causes the
FX to also return sub menu items that are not
being displayed.
• If you specify “SEPARATOR” as the first menu
item, it will be ignored.
• The display on/off setting of the display group
parameters “GROUP1” to “GROUP10” and the
auto switching parameter “AUTO” apply to the
trend, digital, bar graph, and historical trend
menus. (For example, if you set AUTO to off
for the trend menu, and then set AUTO to on
for the digital menu, AUTO will be turned on
for the trend, digital, bar graph, and historical
trend menus.)
• You cannot specify DATA_SAVE_MODE,
SELECT_SAVE, REPORT_SAVE, ALL_SAVE,
and MANUAL_SAVE on models that do not
have a CF card slot or USB interface (/USB1
option).
• You cannot specify MODBUS_CLIENT,
FTP_LOG, MAIL_LOG, WEB_LOG,
SNTP_LOG, and DHCP_LOG on models that
do not have an Ethernet interface (/C7 option).
• You cannot specify MODBUS_MASTER on
models that do not have a serial interface (/C2
or /C3 option).
• You cannot specify COMMU_LOG and
MODBUS_LOG on models that do not have
a communication interface (/C2, /C3, or /C7
option).
• You cannot specify REPORT,
REPORT_CHANNEL, REPORT_SAVE,
COLUMN_BAR, COLUMN_BAR_DISP,
COLUMN_BAR_SELECT, or
REPORT_GROUP on models that do not
have the /M1, /PM1, or /PWR1 math option.
3.4 Setting Commands