User Manual

3-20
3.4 Setting Commands
IM 04L21B01-17EN
SE Sets the line width and the
number of grid sections to use
on the trend graph
Syntax
 SEp1,p2<terminator>
p1
Trend line width (1 to 3) in dots
p2
Number of grid segments (4 to 12, AUTO)
Query
 SE?
Example Set the trend waveform line width to 1 dot and
the number of grid segments to 10.
SE1,10
TB Sets the bar graph display
Syntax
 TBp1<terminator>
p1
Bar graph display direction
HORIZONTAL
VERTICAL
Query
 TB?
Example Display bar graphs horizontally.
TBHORIZONTAL
SB Sets the bar graph for a channel
Syntax
 SBp1,p2,p3<terminator>
p1
Measurement or computation channel
number
p2
Bar graph base position
NORMAL
Normal (lower limit)
CENTER
LOWER
Lower limit
UPPER
Upper limit
p3
Number of scale divisions (4 to 12)
Query
 SB[p1]?
Example Set the number of scale divisions on the bar
graph for channel 002 to 5, and display the bar
graph from the span lower limit (the scaling lower
limit if scaling is enabled).
SB002,NORMAL,5
Description You can specify computation channels (including
in queries) on models with the /M1, /PM1, or
/PWR1 math option.
TN Sets a scale
Syntax
 TNp1,p2,p3<terminator>
p1
Measurement or computation channel
number
p2
Display position (OFF, 1 to 6)
p3
Number of divisions (4 to 12, C10)
Query
 TN[p1]?
Example Set the scale display position for channel 003 to
2, and set the number of divisions to 10.
TN003,2,10
Description You can specify computation channels (including
in queries) on models with the /M1, /PM1, or
/PWR1 math option.
SV Sets a measurement channel’s
moving average
Syntax
 SVp1,p2,p3<terminator>
p1
Measurement channel number
p2
Moving average (OFF, ON)
p3
Number of moving average samples (2 to
400)
Query
 SV[p1]?
Example Set the number of moving average samples for
channel 002 to 12.
SV002,ON,12
SC Sets a channel display color
Syntax
 SCp1,p2<terminator>
p1
Measurement or computation channel
number
p2
Display color (see the SL command, which
is used to set a trip line)
Query
 SC[p1]?
Example Set the channel 002 display color to blue.
SC002,BLUE
Description You can specify computation channels (including
in queries) on models with the /M1, /PM1, or
/PWR1 math option.
TA Sets an alarm point mark
Syntax
 TAp1,p2,p3,p4,p5,p6,p7<terminator>
p1
Measurement or computation channel
number
p2
Mark kind
ALARM
Alarm mark
FIXED
Fixed mark
p3
Scale board display (ON, OFF)
p4
Alarm level 1 display color (24 colors; see
the SL command, which is used to set a trip
line)
p5
Alarm level 2 display color (24 colors; see
the SL command, which is used to set a trip
line)
p6
Alarm level 3 display color (24 colors; see
the SL command, which is used to set a trip
line)
p7
Alarm level 4 display color (24 colors; see
the SL command, which is used to set a trip
line)
Query
 TA[p1]?
Example Display alarm marks on the channel 004 scale.
TA004,ALARM,ON
Description You can specify computation channels (including
in queries) on models with the /M1, /PM1, or
/PWR1 math option.