Owner's manual

2-37
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
2.10 Saving Display Template
Saving Templates
On the menu bar, select [File] - [Save Template]. The current display settings are saved
as a template file. The template file is saved with the name default.tdx in the folder of the
currently displayed data.
The following information is saved in the template.
• Print comment • The background and grid color
of the waveform display area
• Y-axis zone setting • The width of the zone display
area of each group
• ON/OFF condition of the clipping of the • The active waveform
displayed waveform
• Settings specied in the General Display Settings • The height of the color overview
of each group
• The width of the zone display area of each group • The grid density
• Zoom rate of the time axis • Show/Hide condition of the zone
display area
• Display mode of the time axis (absolute/relative) • Selected group
• Waveform display area • ON/OFF condition of the alarm
display
• Grid type • Position of the display screen
• The channel identication string mode (channel/tag)
• ON/OFF condition of le information items (see section 2.1)
Using Templates
On the menu bar, select [File] - [Use Template].
• If there is no display settings le, the information from the template le that is in the
same folder is used to display the data le.
• If there is a display settings le, the information in the display settings le is used to
display the data le.
If you do not want to use a template, select [File] - [Use Template] again on the menu bar
to clear the selection.