Owner's manual

2-11

IM 04L21B01-63EN

Displaying Data

Index

Setting the Y-axis

Selecting the Waveform Display Zone

User zone

Edit zone

Full zone

Slide zone

Auto zone

Multi-axis zone

Waveform display limit

([Y-Axis] - [Clip])

Click one

([Y-Axis] - [User Zone]/[Edit Zone]/[Full Zone]/

[Slide Zone]/[Auto Zone]/[Multi-Axis Zone])

Select from the following list of choices:

• User zone: Each waveform is displayed in the range specied in [Zone] under

the [General Display Setting] (the zone cannot be changed on the

waveform display screen).

• Edit zone: Each waveform is displayed in the range specied in [Zone] under the

[General Display Setting] (the zone can be changed on the waveform

display screen).

• Full zone: Display all waveforms using full zones.

• Slide zone: Display the waveforms in a cascade fashion from the top to the

bottom of the waveform display area.

• Auto zone: Display the waveforms by equally dividing the waveform display area

by the number of displayed waveforms.

• Multi-axis zone: Display the Y-axis of multiple waveforms.

Note

If the waveform display zone is set to some setting other than multi-axis zone and auto zone,

only the Y-axis of the active waveform is displayed.

Examples of the Various Zone Settings

• Full zone • Slide zone

Full zone

Slide zone

2.2 Displaying the Waveform