Manual

1-20
IM 04L21B01-01EN
Report Data (/M1, /PM1, and /PWR1 options)
Report data residing in the internal memory can be displayed.
For the operating procedure, see section 4.5.
Number of the displayed report data/number of report data in the internal memory
Start: Start date/time
Timeup: Report date/time
Channel number
Unit
Report data status
Indicates that the following occurred
between the report interval.
E: Error data
O: Over data
P: Power failure
C: Time change
B: Burnout
Average, maximum, minimum, sum,
or instantaneous value
Report type
Stacked Bar Graph (/M1, /PM1, and /PWR1 options)
You can display the report data (that is stored in the internal memory) of each report
group in a stacked bar graph.
For operating instructions, see section 4.10.
For information about report groups, see section 9.5.
• Types of Displayed Data
The type of displayed data is determined by the report kind, which is set using the
report function.
Report Kind Displayed Report Data
Hour, H + D Sums for each hour and sums for the day
Day + Week Sums for each day and sums for the week
Day, D + M Sums for each day and sums for the month
Daily sums of each channel and the
daily sums of all channels of the
report group
If you select a bar graph, the sum
of the hour selected with the cursor
is displayed.
Hourly report group sums (bar graph)
Sums for the day (bar graph)
of a report group
Example: Hourly + daily display
1.3 Display