Manual

6-18
IM 04L21B01-01EN
6.9 Saving/Loading the Setup Data
This section explains how to save and load setup data from external storage media.
This is only valid on FXs that have a CF card slot or USB interface (/USB1 option).
Procedure
• Saving the Setup Data
1.
Carry out the procedure below to show the display.
Press MENU (to switch to setting mode), and select the File tab > Save settings.
Press the CF or USB soft key, and then press DISP/ENTER.
2.
Set the file name. (Up to 32 characters,
A a # 1
)
Symbols that can be used: #, %, (, ), +, -, ., @, °, and _.
Strings that cannot be used: AUX, CON, PRN, NUL, CLOCK, COM1 to COM9, and LPT1 to
LPT9.
To cancel the operation, press ESC.
3.
Press DISP/ENTER.
The setup data is saved.
• Loading the Setup Data for the Setting Mode
1.
Carry out the procedure below to show the display.
Press MENU (to switch to setting mode), and select the File tab > Load settings.
Press the CF or USB soft key, and then press DISP/ENTER.
2.
Use DISP/ENTER and arrow keys to select the setup file to be loaded.
* Setup data files are stored in the root directory [/].
To cancel the operation, press ESC.
3.
Press DISP/ENTER.
The setup data is loaded.
Note
For details on how to use the Sort, , and keys, see section 6.7.