Manual

6-7
IM 04L21B01-01EN
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
Setup Items
• Batch > On/Off
Select On to use the batch function.
• Batch > Lot-No. digit
Select the number of digits of the lot number from 4, 6, or 8. Select Off to disable the
lot number.
• Batch > Auto increment
Settings Description
On Automatically sets the lot number of the next measurement to “the lot number of
the current measurement + 1.”
Off Disables the operation described above.
• Data file name > Structure
Batch: Sets the names of the display data les or event data les to “serial number +
batch name.”
For details on the data le name, see section 1.4.
• Text field number
Select a number from 1 to 8.
• Text field > Title of field or Characters
Set the string.
Title of eld: (Up to 20 characters,
A a # 1
), Characters: (Up to 30 characters,
A a # 1
)
Procedure
• Setting the Batch Name (Batch number + lot number) and Comment
1.
In the operation mode, press FUNC.
The Function menu appears.
2.
Press the Batch soft key.
A window appears for you to enter the batch name and comment.
3.
Set the batch number. (Up to 32 characters,
A a # 1
)
Symbols that can be used: #, %, (, ), +, -, ., @, °, and _.
If you are using the lot number, set the lot number.
4.
Set batch comments 1, 2, and 3. (Up to 50 characters each,
A a # 1
)
5.
Press DISP/ENTER.
Note
• Batch numbers and lot numbers cannot be changed after memory start.
• You can change the comment as many times as you wish before executing memory start.
After memory start, only the comments that are not specified can be entered. You can
change the comment as many times as you wish while the window for setting the comment
is displayed. The last specified comment is valid.
• The comment is cleared when memory stop is executed.
• The batch number, lot number, and comments are saved to the display data file or event
data file. They are not saved to the setup file.
6.3 Using the Batch Function