Manual

6-3
IM 04L21B01-01EN
Saving and Loading Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
App
Index
• Event data (when recording event data)
• Sample rate
Select the data recording interval. Use the table under “Data length” for reference.
• Mode
Settings Description
Free Records data continuously.
Single Records data when the trigger condition is met.
Repeat Records data each time the trigger condition is met.
• Data length
Select the size of a record data le. The recorded data is divided by the le size
specied here. The available data lengths vary depending on the number of
memory sampling channels and the Sample rate setting.
Sample rate
1
125 ms 250 ms 500 ms 1 s 2 s
Selectable range
of data length
10 min to
1 day
10 min to
2 days
10 min to
3 days
10 min to
7 days
10 min to
14 days
Sample rate
1
5 s 10 s 30 s 1 min 2 min
Selectable range
of data length
10 min to
31 days
10 min to
31 days
1 hour to
31 days
1 hour to
31 days
1 hour to
31 days
Sample rate
1
5 min 10 min
Selectable range
of data length
1 hour to
31 days
1 hour to
31 days
1 You cannot choose a sample rate that is higher than the scan interval.
• Pre-trigger
Specify the range when recording data before the trigger condition is met. Select
the range as a percentage of the data length from 0, 5, 25, 50, 75, 95, and 100%.
If you do not want to record the data existing before the trigger condition is met,
select 0%.
• Trigger signal > Key
Select On if you want to activate the trigger using key operation.
Note
• Triggers can be applied using event action (see section 7.1).
• If the trigger condition is already met when you press START, recording starts.
6.1 Setting the Recording Conditions of the Measured Data