Manual

3-36
IM 04L21B01-01EN
2
Configure calibration correction. Press MENU (to switch to setting mode), and
select the Menu tab > Meas channel > Calibration correction.
Set points for the calibration correction
Set the “MES val” values to the input scale values at the starting points of each line
and the “True val” values to the output scale values at the starting points of each line.
Number of
set points
MES
value [V]
True
value [V]
Number of
set points
MES
value [V]
True
value [V]
1 0.25 1.30 6 4.00 6.60
2 0.45 2.80 7 7.48 8.30
3 0.70 3.70 8 8.52 9.00
4 1.80 5.10 9 9.25 9.40
5 2.50 5.70 10 9.50 9.80
Note
For details on calibration correction (/CC1 option), see section 3.9.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option)