User’s Manual Model FX1002/FX1004/ FX1006/FX1008/FX1010/FX1012 FX1000 IM 04L21B01-01EN 3rd Edition
Thank you for purchasing the FX1000 (hereafter referred to as “FX”). This User’s Manual explains how to use the FX. To ensure correct use, please read this manual thoroughly before operation. The following manuals are provided for the FX: • Paper Manual Manual Title FX1000 Safety Precautions and Installation Guide How to Use the CD Installing FXA120 DAQSTANDARD and Manual No.
Trademarks Revision History ii • vigilantplant is a registered trademark of Yokogawa Electric Corporation. • Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Adobe and Acrobat are registered trademarks or trademarks of Adobe Systems Incorporated. • Company and product names that appear in this manual are registered trademarks or trademarks of their respective holders.
How to Use This Manual Structure of the Manual Before reading this manual, familiarize yourself with the basic operations of this instrument by reading the First Step Guide. For a description of the communication function and the accompanying software program, DAQSTANDARD for FX1000, read the respective manual. This user’s manual consists of the following sections. Chapter 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Appendix Title and Contents Overview of Functions Explains the features of the FX.
How to Use This Manual Conventions Used in This Manual Unit K k Denotes 1024. Example: 768 KB (file size) Denotes 1000. Markings Improper handling or use can lead to injury to the user or damage to the instrument. This symbol appears on the instrument to indicate that the user must refer to the user’s manual for special instructions. The same symbol appears in the corresponding place in the user’s manual to identify those instructions.
Contents 1 How to Use This Manual................................................................................................................... iii Chapter 1 Chapter 2 Chapter 3 2 Overview of Functions 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 1.10 Input Section......................................................................................................................... 1-1 Alarms..............................................................................................................
Contents Chapter 4 Chapter 5 Switching Operation Screens 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 Operations for Changing the Displayed Contents 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.10 5.11 5.12 5.13 5.14 5.15 5.16 Chapter 6 Chapter 7 Setting Display Groups......................................................................................................... 5-1 Displaying Tags or Channel Numbers..................................................................................
Contents Chapter 8 Chapter 9 1 Using the Security Function 8.1 8.2 8.3 Disabling the Key Operation (Key Lock Function)................................................................ 8-1 Enabling Only Registered Users to Operate the FX (Login Function).................................. 8-3 Logging in and Logging Out.................................................................................................. 8-6 Computation and Report Functions (/M1, /PM1, and /PWR1 Options) 9.1 9.2 9.3 9.4 9.
Blank Page
Chapter 1 Overview of Functions 1.1 Input Section 1 2 • Number of Measurement Channels and Scan Interval The FX acquires data by sampling measurement channel input signals at the set scan interval.
1.1 Input Section The following input processing and computation are available.
1.1 Input Section x X a A X = (B – A) x–a b–a +A 10 V Measured value B A ( Output value Measured value a b Number of break points: Up to 16 –100 °c 3 For the setting procedure, see section 3.3. Low-cut For square root computation, measured values below the specified value are cut. For 1-5 V input, values below 0 % are cut. Measured value ) Low-cut value – Measured value 6 Input value For the setting procedure, see section 3.3. 7 Pulse Input (/PM1 Option) Counts the pulses.
1.1 Input Section Note Difference computation is executed even if the input type or range is not the same between the difference computation channel and the reference channel. The difference is computed discarding the decimal place and unit, and the decimal place and unit of the difference computation channel are applied. Example 1: If the input value of the difference computation channel is 10.00 and the measured value of the reference channel is 100.0, the computed result is 10.00 – 100.0 = –90.00.
1.2 Alarms 1 Alarm Type You can use the alarms shown below. The character inside the parentheses is the symbol denoting each alarm. For the alarm setting procedure, see section 3.7. High Limit Alarm (H) Alarm value Measured value 2 3 Low Limit Alarm (L) Measured value Hysteresis Overview of Functions This function generates an alarm when the measured data meets a certain condition. Up to four alarms can be set for each channel.
1.2 Alarms Alarm Indication The alarm conditions are displayed as alarm icons in the status display section and on the operation screen such as the trend, digital, bar graph, overview displays. Detailed information about the alarms is displayed in the alarm summary. • Hold/Non-hold of Indications The alarm indication can be set to operate in the following fashion when the condition is no longer met. • Clear the alarm indication (non-hold).
1.2 Alarms Alarm Output Relay Operation Non-hold/Hold Reflash Channel 3 Alarm output relay (Reflash on) Display Alarm output relay (Reflash off) 500 ms (when a relay is set to OR logic) Alarm OR (You can set AND/OR for the alarm output relay and internal switch. For details about the internal switch, see the next page.
1.2 Alarms • Energize or De-energize Operation You can select whether the alarm output relay is energized or de-energized when an alarm occurs. If you select de-energize, the alarm output relays will be in the same state when the power is shut off as they are when an alarm occurs. The setting applies to all alarm output relays. • Non-Hold/Hold The alarm output relay can be set to operate in the following fashion when the alarm condition is no longer met. • Turn OFF the relay output (non-hold).
1.3 Display 1 Overview of Functions This section will explain the FX display. 2 Common Items Related to the Display • 5.7-Inch Color LCD and Parts of the Display The FX has a 5.7-inch TFT color LCD (240 × 320 dot resolution). The screen consists of the status display section and the data display section.
1.3 Display Status Display Section The following information is displayed in the status display section during operation mode or setting mode. Memory sampling status Memory sampling stopped Memory sampling in progress Data type DISP: Display data EVENT: Event data Memory sampling progress Displays the progress using a green bar graph. The frame indicates the file save interval (display data) or the data length (event data). Memory sampling icon Error in internal memory.
1.3 Display Trend Display (T-Y) Measured data is displayed in a waveform. For the operating procedure, see section 4.2. Overview of Functions Current value mark Trend Space function Inserts a division-wide space here. See section 4.2 2 Scale See section 5.7 Trend interval See section 5.3 Grid See section 5.10 Trip line (up to four lines) See section 5.1 1 division (30 dots) 3 4 Numeric display section See section 4.2 Time at the grid position Either displays the time, or the date and time.
1.3 Display • Updating of the Waveform On the screen, 30 dots along the time axis is represented by a unit called division (see the figure on the previous page). The displayed waveform is updated at an interval corresponding to one dot. This interval is determined by the time corresponding to one division (referred to as the trend interval).
1.3 Display 1 Message display method Overview of Functions • Except for the vertical display, you can set the direction in which messages are displayed to horizontal or vertical. For the setting procedure, see section 5.10. • Messages can be displayed consolidated at the upper left of the screen (list display). For the operating procedure, see section 4.2. 2 List display 3 Vertical display 4 5 • Zone Display You can display channels in specified zones.
1.3 Display • Alarm Indication Alarm mark, alarm type, and measured value are displayed as follows according to the alarm status.
1.3 Display • Alarm Indication When indication is set to hold Alarm ACK When indication is set to non-hold Alarm Bar Graph Display Occurrence 2 Alarm ACK Release Alarm mark Green Red Green Green Blinking Blinking Green Green Blinking Red Green red green red Measured value Red Blue Blue Blue Red Blue Blue Blue Red Red 1 Overview of Functions The alarm mark and measured values are displayed in the following ways depending on the alarm status.
1.3 Display Historical Trend Display The waveform of the past measured data (display or event data) in the internal memory or external storage medium can be displayed. This function is called Historical trend. • Methods of Displaying the Historical Trend There are four methods to display the historical trend of the measured data in the internal memory. • Display from the alarm summary. For the operating procedure, see section 4.6. • Display from the message summary.
1.3 Display Overview Display Channels on which an alarm is occurring are indicated in red Alarm type 4 Tag or channel number Measured value and unit 5 • Alarm Indication The channel display area, channel number or tag name, alarm type, and measured value are displayed in the following ways, depending on the alarm status.
1.3 Display Message Summary Displays a list of written messages and the time the messages were written. • Up to 450 messages can be displayed. • Up to 50 messages that are added to the past data section (added messages) can be displayed. • You can select arbitrary message information and recall the historical trend of the display data or event data that contains the message. For the setting procedure, see section 4.7.
1.3 Display Memory Summary Date/Time of the most recent data Number of data points in the internal memory/maximum number of data points that can be recorded in the internal memory 2 3 4 Data type • Display data • Event data 1 Overview of Functions Displays the information pertaining to the display data and event data in the internal memory. • By selecting the display data or event data, the historical trend display can be recalled.
1.3 Display Report Data (/M1, /PM1, and /PWR1 options) Report data residing in the internal memory can be displayed. For the operating procedure, see section 4.5. Report type Start: Start date/time Timeup: Report date/time Unit Report data status Indicates that the following occurred between the report interval.
1.3 Display 1 • Display Modes You can switch the bar graph between single graph and dual graph display. Overview of Functions Dual graph display (Shows the data from two consecutive periods) Single graph display 2 3 4 Status Display 5 The following displays are available. For the operating procedure, see section 4.5. • Relay Status Display 6 Displays the status of the alarm output relay and internal switch.
1.3 Display Setting the Display Conditions of the LCD The display conditions of the LCD can be configured. 1-22 Display Attribute Setting Background color of the operation display The background color of the display can be set to white or black. The default value is White. For the setting procedure, see section 5.12. Background color of the historical trend screen You can select white, cream, black, or light gray for the background color of the screen. The default value is Black.
1.4 Data Storage Function 1 Data Types The FX can record the following types of data. Data Type Display data Description • Waveform data displayed on the trend display. The measured data is recorded as a specified sampling interval. The sampling interval is specified using the trend interval. • The minimum and maximum values among the measured data within the sampling interval are saved. • A header string (common to other files) can be written in the file.
1.4 Data Storage Function Flow of Data Recording and Storage Measured data is recorded once to the internal memory and then saved to the external storage medium. Measurement channel Computation channel Data from other devices (through communication interfaces) (/C2, /C3, and /C7 options) . . . . . .
1.4 Data Storage Function Recording Method of Display Data and Event Data For the setting procedure, see section 6.1. For operating instructions, see section 6.4. Select display data only, display data and event data, or event data only. Overview of Functions • Types of Data to Be Acquired 1 2 Deciding the Data to Be Recorded Record the data that suits your application. Refer to the following examples. Example 1: Continuously record the waveform data as with the conventional chart recorder.
1.4 Data Storage Function • Recording Conditions of Event Data Item Source channels Sampling interval File creation Description Same as the display data. Choices are available in the range of 125 ms to 10 min. However, you cannot specify an interval that is faster than the scan interval. A file is created when the specified data length is reached. Files are also created in the following cases. • When a file is created manually. • When the memory sampling is stopped.
1.4 Data Storage Function 1 • Creating Files through Key Operation Files can be created using keys. 2 Time File File File Previous files Current file 3 For operating instructions, see “Creating a Display Data File or an Event Data File” in section 6.4. Manual Sampled Data Manual sampled data is recorded to the internal memory. When the number of manual sampled data exceeds 400, the data is overwritten from the oldest data.
1.4 Data Storage Function Saving Data to the External Storage Medium You can only use this feature on FXs that have a CF card slot or USB interface (/USB1 option). For the setting procedure, see section 6.2. For operating instructions, see section 6.4. • Type of External Storage Medium • CF card (32 MB or more) • USB flash memory (/USB1 option) • Auto Save Have the CF card inserted in the slot at all times. The data in the internal memory is automatically saved to the CF card.
1.4 Data Storage Function Save Operation (Always retain most recent data file/media FIFO) • Operation Old Deleted Update date File 1 File 2 New File 3 1 Overview of Functions When saving the data files automatically, you can save the data so that the most recent data files are constantly retained in the CF card. With this method, you can use the FX continuously, without changing the CF card.
1.4 Data Storage Function Save Destination You can select a CF card or USB flash memory (/USB1 option). Data Save Destination Directory You can set the data save destination directory name (DATA0 by default). • File Name The FX can name measured data files that are automatically saved to the internal memory in one of the following three ways.
1.4 Data Storage Function • Saving Data through Key Operation Data Storage Description All save Collectively saves all the data in the internal memory. Selective save Saves the specified display data or event data file. Manual sampled data save Collectively saves all the manual sampled data in the internal memory. Report data save Collectively saves all the report data in the internal memory.
1.5 Batch Function You can add the batch information listed below to display data files and event data files. You can use batch information to manage display data files and event data files. For the setting and operating procedure, see section 6.3. Batch Information • Batch Number and Lot Number Display data files and event data files can be identified by their “batch number-lot number” (hereinafter referred to as batch name). The lot number does not have to be specified.
1.6 Event Action and Remote Control Functions (/R1 and /PM1 Options) 1 Events • Events Event Remote Output relay Internal switch Timer Match time timer Alarm Level/Edge Level/Edge Level/Edge Level/Edge Edge Edge Level/Edge USER key Edge 2 3 4 Select from the following events. 1 Overview of Functions A specified action is carried out when an event occurs. This function is called event action.
1.6 Event Action and Remote Control Functions (/R1 and /PM1 Options) • Timers Four timers are available. The timers are also used with the TLOG computation (/M1, /PM1, and /PWR1 options). Timer Type Absolute timer Relative timer Set the timer A Timeout Ref. time A A Time A Set the timer Reset the timer B A: Interval Time B B: Interval • Absolute Time Mode The timer expires at the times determined by the reference time and the interval. The reference time is set on the hour (00 to 23).
1.6 Event Action and Remote Control Functions (/R1 and /PM1 Options) Action 1 Select from the following actions. Action Memory start/stop Memory start Memory stop Event trigger Level/Edge1 Level Edge Edge Edge Description Starts/stops memory sampling. Starts the memory sampling. Stops the memory sampling. Applies a trigger for starting the event data recording. This is valid when recording event data in trigger mode. See the next page. Alarm acknowledge Edge Releases the alarm output.
1.6 Event Action and Remote Control Functions (/R1 and /PM1 Options) Event Trigger Operation When the event is set to output relay, internal switch, or alarm If the output relay is activated, the internal switch is 1, or the alarm is occurring during memory sampling, the event trigger is always activated. However, the number of times the trigger is activated depends on the event data mode (single or repeat).
1.6 Event Action and Remote Control Functions (/R1 and /PM1 Options) Miscellaneous 1 The combinations that are checked in the table below can be used.
1.7 Security Function This section will explain the FX security functions. Key Lock Function Key lock is a function that prohibits key operations. You enter a password to release the key lock. For the setting procedure, see section 8.1. Key Lock Items Description Keys The following keys can be locked independently. START key, STOP key, MENU key, USER key, DISP/ENTER key (prohibits switching the operation screen). Access to the storage medium1 Prohibits all operations listed below.
1.7 Security Function Login Function 1 Overview of Functions With the login function, only registered users can operate the FX. Access from communication functions (/C7 option) can also be limited to users registered here. For the setting and operating procedure, see sections 8.2 and 8.3 respectively. 2 • Login and Logout You enter your user name and password to log into the FX in the following cases.
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 Options) Computation Function Equations can be defined on special computation channels by using measured data, power data, or computed data as variables. The computation channel data can be displayed or saved. For the setting procedure, see section 9.1.
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 options) Type Example 1 Description of the Example CLOG.MAX(001.002.003) Determines the maximum value among [001], [002], and [003]. CLOG.MIN(001.002.003) Determines the minimum value among [001], [002], and [003]. CLOG.AVE(001.002.003) Determines the average value of [001], [002], and [003]. CLOG.P-P(001.002.003) Determines the difference between the maximum value and the minimum value among [001], [002], and [003].
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 options) • Data That Can Be Used in Equations The data listed below can be used. Data Measurement channel data Computation Channel data1 Constant Communication input data Status of the remote control input1 Pulse input1 Internal switch status Alarm output relay status1 Flag1 Power data1 Notation 001, etc. 101, etc. K01 to K60 C01 to C24 D01 to D082 Description Specify the computed data using a channel number.
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 options) • Computation Data Dropout • Numeric Display and Recording The range of displayed values of computed data is from –9999999 to 99999999 excluding the decimal point. The decimal place corresponds to the decimal place of the lower limit span of the computation channel. On the numeric display, values are displayed if the computed result is within the above range regardless of the upper and lower limits of span.
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 options) Resetting the TLOG Computed Value You can select whether to reset the TLOG computed value at each interval. The figure below illustrates the reset operation for sum computation (TLOG.SUM). Example: Result of the TLOG.SUM computation Timer timeout Reset: On 1 2 3 Reset Reset Reset Reset: Off When reset is On, the sum value is calculated over each interval. When set to Off, the sum value from computation start is calculated.
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 options) Report Function 1 Overview of Functions This function is used to create hourly, daily, weekly, and monthly reports. For the setting procedure, see section 9.5. • Report Data Types 2 You can select from four types among maximum value, minimum value, average value, sum value, and instantaneous value. Report data is calculated from the measured values that have been sampled at the scan interval.
1.8 Computation and Report Functions (/M1, /PM1, and /PWR1 options) Special Data Handling This section explains the handling of special data in TLOG computation, CLOG computation, and reports. • Power Failure Operation (TLOG and Reports) If a power failure occurs when the report function is enabled or in the middle of the TLOG computation, the report operation and TLOG computation resume when the FX recovers from the power failure.
1.9 FAIL/Status Output Function (/F1 Option) When a failure occurs in the FX CPU, the FX generates a relay contact signal (1 signal). The relay is energized when the CPU is normal and de-energizes when a CPU failure occurs. Therefore, relay output is carried out also when the power is turned OFF (including a power failure). You cannot change this behavior.
1.
1.10 Other Functions 1 Overview of Functions Time Related Functions 2 • Time Correction The FX internal clock can be changed in the following ways. Method Description Key operation Sets the FX internal clock to the specified time. 3 Event action function (clock synchronization using remote control signals) Sets the FX internal clock to the nearest hour. 4 SNTP client function Sets the FX internal clock to the time retrieved from an SNTP server.
1.10 Other Functions • DST (Daylight Saving Time) If you are using the FX in an area with daylight saving time, enter the daylight saving time starting and ending dates, and the FX will automatically change the time accordingly. For the setting procedure, see section 2.1. System Display Language This displays the total number of inputs on the FX, the size of the internal memory, the communication functions, the external storage drive, the options, the MAC address, and the firmware version number.
Chapter 2 2.1 Common Operations Setting the Date/Time 1 Set the date/time. 2 Setup Screen Common Operations • Date/Time Press MENU (to switch to setting mode), and select the Menu tab > Date/Time > Time Settings. 3 4 5 6 • DST Press MENU (to switch to setting mode), and select the Menu tab > Date/Time > Daylight Saving Time. 7 8 9 10 Setup Items • Time set Enter the date and time, and press DISP/ENTER.
2.2 Setting the Time Difference from GMT Set the time zone of the region in which the FX will be used. Make sure to set this value if you are using the Internet network functions or the DST function. Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Time Settings. Setup Items • Time settings > Time zone(HHMM) Set the time zone of the region in which the FX will be used in terms of the time difference from GMT.
2.3 Setting the Time Correction Operation during Memory Sampling 1 This function gradually corrects the time when the time is changed while Memory Sampling is in progress. For a description of the time correction operation, see section 1.10. 2 Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Time Settings.
2.4 Setting the Date Format Select the display format of the date. Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Time Settings. Setup Items • Time settings > Date format Settings Y/M/D M/D/Y D.M.Y D,M,Y * Display Example (Example: September 30, 2011) 2011/09/30 09/30/2011 30/09/2011 30.09.2011 Time at the grid position in the trend display (example: 8 O’clock on Nov. 30)* 09/30 08 09/30 08 30/09 08 30.
2.5 Viewing the FX Information 1 The FX information is displayed on the system information screen and the network information screen. 2 Common Operations Procedure • Displaying System Information Screen 3 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the System info soft key. 4 The system information screen is displayed. • Displaying Network Information Screen (/C7 option) 5 1. In the operation mode, press FUNC. The Function menu appears. 2.
2.
2.6 Changing the Displayed Language 1 Set the displayed language. 2 Setup Screen Common Operations Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Operating Environment. 3 4 5 6 Setup Items • Operating environment > Language Set the displayed language to English, Japanese, German, French, Chinese, Italian, Spanish, Portuguese, Russian, or Korean.
2.7 Setting the LCD Brightness and Backlight Saver Change the LCD brightness. In addition, set the backlight saver function to prolong the service life of the LCD backlight. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Display > LCD. Setup Items • LCD > Brightness Select a value from 1 to 8 (2 by default). Larger the value, brighter the display becomes. • LCD > Backlight saver > Mode Settings Description Off Disables the backlight saver.
2.8 Initializing Settings and Clearing the Internal Memory 1 Initialize the settings to default values. In addition, clear the data in the internal memory. For the default settings, see appendix 4. Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the File/Initialize tab1 > Initialize. Common Operations Setup Screen 2 3 4 5 6 1 On FXs that do not have a CF card slot or USB interface (/USB1 option), this is the Initialize tab.
2.9 Using the Relay Contact to Output the FX Status (/F1 option) A signal is output to a dedicated relay when an error occurs in the FX CPU. In addition, a signal is output to a different relay when the specified status occurs. For a description of the FAIL/status output function, see section 1.9. Setup Screen • Status Relay Details Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Status Relay.
2.10 Controlling the FX with a Keyboard (/USB1 option) 1 This section explains how to connect and use a USB keyboard. 2 Connecting and Disconnecting a Keyboard Common Operations • Connection 1. Connect the keyboard to a FX USB port. 3 4 USB port When a message is displayed informing you that a USB device has been connected, the keyboard is ready to be used. 5 • Removal Disconnect the keyboard cable from the FX USB port.
2.10 Controlling the FX with a Keyboard (/USB1 option) Operating from the Keyboard Use the keyboard while viewing the FX screen. When an operation can be carried out on the FX, the same operation can be carried out from the keyboard. Example: Switch to setting mode When the FX is in operation mode, press Ctrl+M. The FX switches to setting mode, and the setting menu appears.
2.11 Using USB Flash Memory (/USB1 option) 1 Connecting/Removing a USB Flash Memory 2 • Connecting a USB Flash Memory After the message, “USB device has been connected.” appears, you can use the USB flash memory device. 2. In operation mode, possible operations are shown. Select the desired operation using the arrow keys and press DISP/ENTER. When set to auto save Common Operations 1. Connect a USB flash memory device to the FX USB port.
2.12 Setting the Decimal Point Type You can set the decimal point type for the display and files saved in text format. Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Operating Environment. Setup Items • Decimal Point Types Setting Point Comma Display Example 1234.56 1234,56 Explanation • Decimal Point Types The decimal point type setting affects the following kinds of files and displays.
Chapter 3 3.1 Measurement Channels and Alarms Setting the Scan Interval and the Integration Time of the A/D Converter 1 Select the scan interval and the integration time of the A/D converter. For a description of the scan interval and the integration time of the A/D converter, see section 1.1. Setup Screen 3 Measurement Channels and Alarms Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > A/D, Memory.
3.2 Setting the Burnout Detection and the Reference Junction Compensation of the Thermocouple Input Set the function that detects burnouts in the sensor for thermocouple input and 1-5V input and the reference junction compensation method of the thermocouple. Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Burnout, RJC. Setup Items • First-CH, Last-CH Select the target channels.
3.3 Setting the Input Range 1 Set the input range for each channel. or the power monitor (/PWR1 option) input setting procedure, see section 3.12, “Measuring F Power.” For the log scale (/LG1 option) range setting procedure, see section 3.13, “Using the Log Scale to Perform Measurements.” Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Operating Environment.
3.3 Setting the Input Range • First-CH, Last-CH Select the target channels. • Range > Mode Settings Description Skip Not measured. Volt, TC, RTD, DI, 1-5V Input type. Represents DC voltage, thermocouple, RTD, ON/OFF input, and 1-5V inputs, respectively. Delta, Scale, Sqrt Difference computation, linear scaling, and square root computation. Set the items with check marks in the table below according to the mode value. Setup Item Type Range Span Lower Span Upper Scale Lower Scale Upper Unit Ref.
3.3 Setting the Input Range 1 • Range > Type Input type when Mode is Delta or Scale. See the description on Mode above. • Range > Range Input type details. Input Type –20.000 mV to 20.000 mVDC –60.00 mV to 60.00 mVDC –200.00 mV to 200.00 mVDC –1.0000 V to 1.0000 VDC –2.0000 V to 2.0000 VDC –6.000 V to 6.000 VDC –20.000 V to 20.000 VDC –50.00 V to 50.00 VDC Pt100 JPt100 On/off (voltage) On/off (contact) 0.800 V to 5.
3.3 Setting the Input Range • Range > Unit Set the unit (up to 6 characters, A a # 1 ). • Range > Ref. CH The reference channel for difference computation. * Note that if you set the reference channel to a channel that is set to log scale (/LG1 option), an error will be returned as the computation result. • Range > Low-cut Select On to use the low-cut function. * The low-cut value for 1 to 5 V input is fixed to 0% value of the input span.
3.4 Setting the Moving Average of the Input 1 Set the moving average function of the measurement channel. This function suppresses the effects of noise. For a description of the function, see section 1.1. Setup Screen 3 Measurement Channels and Alarms Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Moving average. 2 4 5 6 Setup Items 7 Scan Interval Average value Average value 8 Count 9 • First-CH, Last-CH Select the target channels.
3.5 Setting the Auxiliary Alarm Function Set the alarm display and operation of the output relays (/A[ ] and /A4A options). For a description of the function, see section 1.2. Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Alarm > Basic settings; Switch, Relay; or Hysteresis.
3.5 Setting the Auxiliary Alarm Function 1 • Basic setting > Indicator You can choose to make the alarm displays behave in the following ways. Settings Description Nonhold Clears the alarm indication when the alarm condition is released (returns to normal condition). Hold Holds the alarm indication until an alarm acknowledge operation is performed. 2 3 • Internal Switch > AND 4 • Relay > AND Select the relays that are to operate using AND logic.
3.5 Setting the Auxiliary Alarm Function An example of the relay action when alarm ACK is executed is shown below. This example is for the case when the output relay AND item is set to None.
3.6 Hiding the Alarm Indication 1 Select whether to enable the alarm hide function. For a description of the function, see section 1.2. 2 Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Input, Alarm 3 Measurement Channels and Alarms 4 5 6 Setup Items • Alarm action > No logging To enable the function that turns off the alarm indicator and logging, select On.
3.7 Setting Alarms on Channels Set the alarms after setting the range. All alarm settings of a channel are cancelled in the following cases. * For details on the log scale (/LG1 option) alarm settings, see section 3.13, “Using the Log Scale to Perform Measurements.” • When the input type (Volt, TC, etc.) is changed. • When the input range is changed.
3.7 Setting Alarms on Channels 1 Setup Items • First-CH, Last-CH Select the target channels. The target channels are common with the other items that are displayed on the screen. 2 • Alarm > 1, 2, 3, and 4 For each alarm, 1 to 4, select On to enable it. 3 • Alarm > Type Settings Name Description 4 H High limit alarm – L Low limit alarm – h Difference high limit alarm Can be specified on channels set to difference computation.
3.7 Setting Alarms on Channels • Alarm > Relay Select whether to turn On or Off the relay output. • Alarm > No. Set the output relay number or internal switch number when performing relay output. • Alarm > Detect This item appears when the alarm hide function (see section 3.6) is turned On. Select whether to show or hide the alarm indication when an alarm occurs. If set to Off, a signal is output to the alarm output relay or internal switch when an alarm occurs, but it is not indicated on the screen.
3.8 Releasing the Alarm Output (Alarm ACK Operation) 1 This operation is valid when the FX is set as follows: • When Indicator is set to Hold in the basic setting mode. • When Relay Hold is set to Hold and Relay action on ACK is set to Normal in the basic setting mode. • When Relay action on ACK is set to Reset in the basic setting mode. For the Hold and Relay Action on ACK setting procedures, see section 3.5.
3.9 Performing Calibration Correction (/CC1 Option) The input value is calibrated using segments, and the result is used as a measured value. * You cannot specify calibration correction for a channel whose log scale (/LG1 option) mode is set to LogType2. For a description of the function, see section 1.1. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Calibration correction.
3.10 Counting Pulses (/PM1 Option) 1 The pulses applied to the pulse input terminal are counted on a computation channel. For a description of the function, see section 1.1. 2 Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Expression, Alarm 3 Measurement Channels and Alarms 4 5 6 Setup Items • First-CH, Last-CH 7 Select the target computation channels. • Math Select On. 8 • Math > Calculation expression Enter the equation using symbols.
3.10 Counting Pulses (/PM1 Option) • Example 2: Number of Pulses per Minute Using the FX1002 (scan interval set to 250 ms), count the number of pulses received by pulse input terminal 6, and calculate the number of pulses per minute. (Moving average over a minute) Pulse input Time Scan interval (250 ms) 101ch Number of pulses per second (60x) 102ch Number of pulses per minute Expression Assign the computation channel as shown below and set the expressions.
3.10 Counting Pulses (/PM1 Option) Pulse input Time Scan interval 2 P01 Number of pulses per scan interval 0 101ch Reset count 0 1 1 1 2 2 3 4 (Sum) 102ch Sum value Measurement Channels and Alarms K01 reset value 1 5 (Resets the value below the reset value) Channel 101: Reset Count Calculates the number of times the pulse sum value is reset. The expression “((102+P01).GE.
3.11 Setting the Method of Detecting Over-Range Values of Linearly Scaled Measurement Channels Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Input, Alarm Setup Items • Input > Value on over-range Settings Description Free The value is set to –over range if the value is less than –30000 and +over range if the value is greater than 30000 excluding the decimal point.
3.12 Measuring Power (/PWR1 Option) 1 Power Monitor Function Measure the measurement elements of electrical power. Set an expression on a computation channel, and then start the computation to begin the measurement. In addition, by using other operators, you can measure the maximum, minimum, average and electric energy.
3.12 Measuring Power (/PWR1 Option) Measurement Element Active or regenerative energy Active energy Regenerative energy Reactive energy (LAG: +) Reactive energy (LEAD: –) Apparent energy Unit Wh Wh –Wh Varh –Varh Vah Expression TLOG.SUM(_WAT_) TLOG.SUM(_WATP_) TLOG.SUM(_WATN_) TLOG.SUM(_VARP_) TLOG.SUM(_VARN_) TLOG.SUM(_VA_) • Report Function By using the report function, you can output electric energy as a power measurement channel’s hourly, daily, or monthly report.
3.12 Measuring Power (/PWR1 Option) 1 Setup Items • Phase and wire system Set the phase and wiring system by selecting from the following options: 1P2W (single-phase two-wire system), 1P3W (single-phase three-wire system), and 3P3W (three-phase three-wire system). • Input voltage 2 3 Set the rated input voltage to 120V or 240V. 1 Enter values within the ranges listed below for each of the settings. Setup Item VT ratio Setting Range 1.0 to 6000.0 CT ratio 0.05 to 999.99 1000.0 to 9999.
3.12 Measuring Power (/PWR1 Option) • Timer This sets the timer that is used in TLOG computations (this is used when you are resetting the electric energy after the specified time has elapsed). Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event action > Timer. For the timer setting procedure, see section 7.1. • Alarm Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Expression, Alarm. For the computation channel setting procedure, see section 9.
3.12 Measuring Power (/PWR1 Option) 1 Examples of power measurement expressions are given below.
3.12 Measuring Power (/PWR1 Option) • Example 5: Using the stacked bar graph display of the report function Measure the active power, and create monthly and daily reports for that value. The sum of the reports will be the electric energy. You can use the stacked bar graph of the report data to display the total electric energy for a month and the electric energy for each day. For information on the stacked bar graph display, see section 4.10.
3.12 Measuring Power (/PWR1 Option) Note If a malfunction is detected in the power monitor function, the following will occur. • All the power measurement elements will become error data. • The computation icon will be displayed in red (section 1.3). • “Detecting measurement error” in the communication status information becomes “1.” For information on the communication status information, see section 5.2 in the Communication Interface Manual, IM 04L21B01-17EN.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) Log Scale Display Function You can apply a logarithmic voltage that has been converted from a physical value to the FX, and then use the FX’s log scale (logarithmic scale) to display and record the physical value. The FX supports four types of input signals. • Logarithmic Input This is referred to as “log input.” Log input is input in which the voltage corresponds to logarithmic values of physical values.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) 1 Setup Screen Input Range and Alarms Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Range, Alarm. 2 3 Measurement Channels and Alarms 4 5 Color Scale Band Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Color scale band.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) Setup Items • Input Range • First-CH, Last-CH Select the target channels. • Range > Mode Setting Name LogType1 Log input (Nonlinear log input is possible through the use of calibration correction.) LogType2 Log linear input or pseudo log input. • Range > Range Set the range to 20mV, 60mV, 200mV, 2V, 6V, 20V, 50V, or 1V. • Range > Span_L and Span_U Set the settable range for the Range setting.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) When Mode is LogType2 (Log linear input) You can set the settings so that Scale_L is less than Scale_U or so that Scale_L is greater than Scale_U. Set the mantissas to values in the range of 1.00 to 9.99. Set the mantissas using three digits. The mantissa that you set for Scale_L is automatically set as the mantissa of Scale_U. A value other than 1.00 1.01E–15 to 9.99E+14. However, the difference between the exponents must be at least 1.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) Scale Examples Examples of scales are shown below. Example 1 In this example, the mantissa of the scale lower limit and the mantissa of the scale upper limit are both 1. Lower 1.00E+01 Scale Upper 1.00E+04 Example 2 In this example, the mode is set to LogType1, and the mantissa of the scale lower limit and the mantissa of the scale upper limit are both a value other than 1. Lower 5.00E+00 Scale Upper 2.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) • Range > Unit Set the unit (up to 6 characters, Aa#1 1 ). • Alarm Note • • If you set the number of mantissa display digits to 2, the second decimal place of the mantissa will be ignored. When you set the number of mantissa display digits to 2, set the second decimal place of the mantissa of the alarm value to 0. Example: If you set the alarm value to “1.56E+12,” the actual value will be “1.5E+12.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) Setup Examples LogType2 [pseudo log] and LogType1 [nonlinear log] setup examples are shown below. • Setting the Pseudo Log Range (LogType2) This setting is for logging the pseudo log output (see the table below) of a vacuum gauge. Pressure Reading [Pa] 1.30x10-7 5.00x10-7 1.00x10-6 5.00x10-6 1.00x10-5 5.00x10-5 1.00x10-4 1 Output Voltage [V] 0.13 0.50 1.10 1.50 2.10 2.50 3.10 Pressure Reading [Pa] 5.00x10-4 1.00x10-3 5.00x10-3 1.00x10-2 5.
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) Note • • Set the mantissa to 1.00. The output voltage for pressure reading whose mantissa is 1.00 has a certain deviation. For example, if the pressure reading is 1.00E-5, the output voltage is 2.00 to 2.10 V. In this situation, set the range to the minimum value (2.00 V).
3.13 Using the Log Scale to Perform Measurements (/LG1 Option) 2 Configure calibration correction. Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Calibration correction. Set points for the calibration correction Set the “MES val” values to the input scale values at the starting points of each line and the “True val” values to the output scale values at the starting points of each line. Number of set points 1 2 3 4 5 MES value [V] 0.25 0.45 0.70 1.80 2.
Chapter 4 4.1 Switching Operation Screens Operations in Operation Mode 1 Switching the Screen with the DISP/ENTER Key and Arrow Keys 2 Press DISP/ENTER and arrow keys to show the display selection menu and sub menu to switch the display. The flow of operation is indicated below. DISP/ENTER key and arrow keys TREND Sec. 4.2 GROUP 1 3 GROUP 10 4 Switching Operation Screens Sec. 4.2 DIGITAL GROUP 1 5 Sub menu GROUP 10 Display selection menu 6 Sec. 4.
4.1 Operations in Operation Mode Operations Using Other Keys Soft keys (see below) FUNC key (see below) USER key (see section 7.1) START and STOP keys (see section 6.4) Operation Using the FUNC Key Press FUNC to display the Function menu at the bottom of the screen. Press the Next soft key to switch the menu. Press the desired soft key.
4.1 Operations in Operation Mode Customizing the Menus You can change the contents of the display selection menu, which appears when you press the DISP/ENTER key, and the Function menu, which appears when you press the FUNC key. See section 5.16.
4.2 Displaying the Measured Data as Waveforms, Values, or Bar Graphs This section explains how to use the trend, digital, and bar graph displays. For a description of the function, see section 1.3. Procedure • Showing the Display 1. Press DISP/ENTER to show the display selection menu. 2. Press the arrow keys to select TREND, DIGITAL, or BAR, and press DISP/ ENTER. The selected display appears. • Changing the Displayed Contents 1. Press DISP/ENTER to show the display selection menu. 2.
4.2 Displaying the Measured Data as Waveforms, Values, or Bar Graphs 1 Digital display sub menu 2 Group name: Displays the group 3 AUTO SCROLL ON: Automatically switches the displayed groups AUTO SCROLL OFF: Does not automatically switch the displayed groups 4 Switching Operation Screens Bar graph display submenu 5 6 7 Group name: Displays the group AUTO SCROLL ON: Automatically switches the displayed groups AUTO SCROLL OFF: Does not automatically switch the displayed groups 4.
4.2 Displaying the Measured Data as Waveforms, Values, or Bar Graphs Explanation • ALL CHANNEL/GROUP CHANNEL on the Trend Display On the group display, the channels that are assigned to the group are displayed. In all channel display, the waveforms of all channels that are configured to record data are displayed on the current group display.
4.
4.3 Displaying Past Measured Data (Historical Trend Display) There are five methods to display the past measured data. For a description of the function, see section 1.3. Recall from the display selection menu (see this section). Display from the alarm summary (see section 4.6). Display from the message summary (see section 4.7). Display from the memory summary (see section 4.8). Show the measured data stored on an external storage medium (see section 6.8).
4.
4.3 Displaying Past Measured Data (Historical Trend Display) Sub menu when the alarm summary is being displayed INFORMATION: Shows information about the measured data that is currently displayed For an explanation of the other menu items, see section 4.6. Sub menu when the message summary is being displayed INFORMATION: Shows information about the measured data that is currently displayed For an explanation of the other menu items, see section 4.7. 4.
4.3 Displaying Past Measured Data (Historical Trend Display) 1 • Moving the Cursor and Scrolling the Waveform Cursor value mark 2 Cursor 3 Moves the cursor up by 1 dot. Switching Operation Screens Moves the cursor down by 1 dot. 4 Hold down an arrow key to move the cursor by 1 division at a time. 5 Use the left and right arrow keys on the horizontal trend display. • Displaying the Continuing Data Approximately one screen of data is shown on the historical trend display.
4.3 Displaying Past Measured Data (Historical Trend Display) • If the Data Does Not Fit in the All Data Display Specify the range to be displayed in the all data display. Below is the procedure to display data that is older than the data displayed currently. Items inside the parentheses are for the horizontal trend display. 1. Press the right (up) arrow key. The waveform of all the data in the display memory is displayed at the right (top) of the screen.
4.3 Displaying Past Measured Data (Historical Trend Display) 1 Explanation • ALL CHANNEL/GROUP CHANNEL In the group display, the waveforms of the channels that are registered to the group are displayed. In the all channel display, the waveforms of all channels that have been set to be recorded are displayed on the current group display. The waveforms of channels that are not registered to the group are displayed, without any additional information, in the waveform display area.
4.3 Displaying Past Measured Data (Historical Trend Display) • CURSOR TIME With CURSOR TIME ON The time at the cursor position • TIME AXIS > ZOOM+ and ZOOM- The time axis can be expanded or reduced around the cursor position.
4.3 Displaying Past Measured Data (Historical Trend Display) 1 • INFORMATION (Information on the Displayed Measured Data) The following information is displayed. Page switch mark Use the left and right arrow keys to switch the page. 2 3 4 Description File name Data in the internal memory is displayed as “Memory.” For a file on the external storage medium, the file name is displayed. File type Display corresponds to display data, and Event corresponds to event data.
4.4 Display the Statuses of All Channels on One Screen (Overview Display) This section explains how to use the overview display. For a description of the function, see section 1.3. Procedure • Showing the Display 1. Press DISP/ENTER to show the display selection menu. 2. Press the arrow keys to select OVERVIEW, and press DISP/ENTER. The display appears. • Changing the Displayed Contents 1. Press DISP/ENTER to show the display selection menu. 2. Press the right arrow key to display the sub menu. 3.
4.5 Displaying Various Information 1 This section explains how to display reports (/M1, /PM1, and /PWR1 options) and how to use the status displays. For a description of the function, see section 1.3. Procedure 2 3 • Showing the Display 1. Press DISP/ENTER to show the display selection menu. 2. Press the up and down arrow keys to select INFORMATION. 4 3. Press the right arrow key to display the sub menu. Switching Operation Screens 4. Press the up and down arrow keys to select the sub menu item.
4.5 Displaying Various Information Carry out the procedure below to switch the displayed report data. Up arrow key: Report data being displayed + 1. Down arrow key: Report data being displayed – 1. Left arrow key: Report data being displayed + 10. Right arrow key: Report data being displayed – 10. Note The display is not updated even if a new report is created while displaying the report data. Perform either of the operations below to display the most recent report data.
4.6 Using the Alarm Summary 1 This section explains how to use the alarm summary. For a description of the function, see section 1.3. For details on how to display the summary, see section 4.5. 2 Procedure 3 • Changing the Displayed Contents 1. Press DISP/ENTER to show the display selection menu. 2. Press the right arrow key to display the sub menu. 4 3. Press the up and down arrow keys to select the sub menu item.
4.7 Using the Message Summary This section explains how to use the message summary. For a description of the function, see section 1.3. For details on how to display the summary, see section 4.5. Procedure • Changing the Displayed Contents 1. Press DISP/ENTER to show the display selection menu. 2. Press the right arrow key to display the sub menu. 3. Press the up and down arrow keys to select the sub menu item.
4.7 Using the Message Summary 1 Explanation • CHANGE DISP ITEM Switches between the following two message display methods. • Message, time, and group, or the second of the date and time when the message was written • Message, user name • CHANGE SORT KEY, ASCENDING ORDER, and DESCENDING ORDER The messages are sorted in ascending or descending order by the respective key. The sort symbol is displayed next to the sort item (see the figure on the previous page).
4.8 Using the Memory Summary This section explains how to use the memory summary. For a description of the function, see section 1.3. For details on how to display the summary, see section 4.5. Procedure • Changing the Displayed Contents 1. Press DISP/ENTER to show the display selection menu. 2. Press the right arrow key to display the sub menu. 3. Press the up and down arrow keys to select the sub menu item. The displayed data type is indicated with a green mark.
4.8 Using the Memory Summary • Saving the Data Save the data in the internal memory to the CF card or the USB flash memory (/USB1 option). For a description of the function, see section 1.4. 1. Press DISP/ENTER to show the display selection menu. 1 2 2. Press the right arrow key to display the sub menu. 3 3. Select DATA SAVE MODE with the up and down arrow keys. 4. Press DISP/ENTER. The display switches to DATA SAVE MODE (a string indicating this mode is displayed in the upper left of the screen).
4.8 Using the Memory Summary Progress Display When Saving All Data of the Internal Memory If you carry out All Save* on the memory summary screen, a pop-up window appears showing the progress of the save operation. * Function for saving all data in the internal memory to a CF card or USB flash memory. Note • • • The pop-up window appears only when the memory summary display is showing. If you press the ESC key, the pop-up window clears temporarily and reappears approximately 10 seconds later.
4.9 Displaying a List of Operation Logs 1 Displays the following operation logs. Login log, error log, communication log, FTP log, Web log, e-mail log, SNTP log, DHCP log, and Modbus status log Procedure 2 3 • Displaying the Log 1. Press DISP/ENTER to show the display selection menu. 2. Press the up and down arrow keys to select LOG. * 4 Switching Operation Screens LOG is not displayed with the default settings. To show LOG on the menu, see section 5.16. 5 3.
4.9 Displaying a List of Operation Logs Factor KEY COM REM ACT SYS Description Key operation Operations via communication Operation through the remote control function Operation through event action Operation by the system • Error Log Error message* Error code* Date/time * See section 10.1, “A List of Messages.
4.9 Displaying a List of Operation Logs 1 • Web Log 2 3 Operation (see the table below) Error code* Requested operation (see the table below) Date/time * 4 See section 10.1, “A List of Messages.
4.9 Displaying a List of Operation Logs • SNTP Log Error message (detail code)* Error code* Date/time * See section 10.1, “A List of Messages.” • DHCP Log Error message (detail code)* Error code* Date/time * See section 10.1, “A List of Messages.” • Modbus Status Log Command number, command type (R: read, W: write) Communication status* Communication type (C: client, M: master) Date/time * 4-28 See the Communication Interface User’s Manual, IM 04L21B01-17EN.
4.10 Displaying Stacked Bar Graphs (/M1, /PM1, and /PWR1 Options) 1 This section explains how to use stacked bar graphs. 2 • Changing the Displayed Contents 3 Procedure 1. Press DISP/ENTER to show the display selection menu. 2. Press the right arrow key to display the sub menu. 4 3. Press the up and down arrow keys to select the sub menu item.
4.10 Displaying Stacked Bar Graphs (/M1, /PM1, and /PWR1 Options) Explanation • SINGLE GRAPH/DUAL GRAPH You can display one or two bar graphs. The sums of the first channel in a group and of all other channels that have the same unit as it are displayed. • SINGLE GRAPH Numeric display section Display area 1 Display area 2 The displayed report data varies depending on the report kind, which is set using the report function.
4.10 Displaying Stacked Bar Graphs (/M1, /PM1, and /PWR1 Options) Note The numbers on the vertical axis of display areas 3 and 4 and the dates on the horizontal axis are abbreviated. Display areas 3 and 4 can only display the data from the period immediately preceding that of display area 1 and 2. • Selecting a Bar When SINGLE GRAPH is selected, you can move the cursor to a bar that you want to check, and view the sums of each channel.
Blank Page
Chapter 5 Operations for Changing the Displayed Contents 5.1 Setting Display Groups 1 Assign channels and set the group name for each display group. Set lines at specified positions in the waveform display range on the Trend display. 2 Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Group set, Trip line. 3 4 5 Operations for Changing the Displayed Contents 6 Setup Items • Group number 7 Select the target group number (1 to 10).
5.1 Setting Display Groups Note The channel settings of a display group can be copied to another group. Procedure 1. Select the copy source channel settings. 2. Press the Copy soft key. 3. Select the copy destination channel settings. 4. Press the Paste soft key. The channel settings are copied. • Trip line Set lines at specified positions in the waveform display range on the Trend display. • 1, 2, 3 and 4 Turn On the trip lines you want to display.
5.2 Displaying Tags or Channel Numbers 1 Display the channels using tags or channel numbers. 2 Setup Screen • Tag/Channel Press MENU (switch to the setting mode), hold down FUNC for 3 s (switch to the basic setting mode), and select Environment > Operating Environment. 3 4 5 Operations for Changing the Displayed Contents 6 • Tag Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Tag, Memory, Delay.
5.3 Setting the Trend Interval and Switching to the Secondary Trend Interval Set the trend interval. Switch the trend interval to the secondary trend interval while the memory sampling is in progress. Automatically write messages when the trend interval is switched. For a description of the function, see section 1.3.
5.3 Setting the Trend Interval and Switching to the Secondary Trend Interval • Trend interval [/div] and Second interval [/div] Select the time corresponding to 1 division of the time axis on the trend display from below: You cannot specify a trend interval that is faster than the scan interval.
5.4 Writing Messages Write messages. Setup Screen • Message Write Group Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > View, Message. • Setting the Messages Press MENU (to switch to setting mode), and select the Menu tab > Message. Setup Items • Message • Write group This setting applies only for messages that are written using keys. Settings Description Common Write the message to all groups.
5.4 Writing Messages 1 • Message No. Select the message number (1 to 100). Messages 1 to 10 are common with free messages.* If a message is changed as a free message, the old message is overwritten. * 2 Messages that are written by creating the message on the spot. • Message > Characters Set the message. (up to 32 characters, Aa#1 ) 3 Procedure • Writing Messages 4 Messages cannot be written when the memory sampling is stopped. 1. Display the group to write the message. 2. Press FUNC.
5.4 Writing Messages • Writing Free Messages Create a message on the spot and write it. 1. Display the group to write the message. 2. Press FUNC. The Function menu appears. 3. Press the Free message soft key. 4. Press a message number soft key. The message entry window appears. 5. Enter the message. (up to 32 characters, Aa#1 ) 6. Select ENT and press DISP/ENTER. A message mark, time, and message are shown on the trend display. • Writing Add Messages Add messages to the past data positions.
5.5 Changing the Channel Display Colors 1 Change the channel display colors. The settings are applied to the trend and bar graph displays. 2 Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Color. 3 4 5 Operations for Changing the Displayed Contents 6 Setup Items • Group of channel 7 Select the target channels. • Color To change the color, select from the following 24 colors.
5.6 Displaying Channels in Display Zones Specify a waveform display zone for each channel so that waveforms do not overlap. For a description of the function, see section 1.3. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Zone, Scale Setup Items • First-CH, Last-CH Select the target channels. The target channels are common with the other items that are displayed on the screen.
5.7 Displaying a Scale on the Trend Display 1 Display a scale on the trend display. For a description of the function, see section 1.3. 2 • Scale Position and Number of Scale Divisions 3 Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Zone, Scale.
5.7 Displaying a Scale on the Trend Display • Scale > Division * This is not applied to the Log scale (/LG1 option). Set the number of divisions to make with the main scale marks on the trend display to a value from 4 to 12 or C10. C10: The scale is equally divided into 10 sections by main scale marks, and scale values are indicated at 0, 30, 50, 70, and 100% positions on the trend display. The figure below shows different scale divisions for when the span is from 0 to 100 and the unit is M/H.
5.7 Displaying a Scale on the Trend Display Note • • • • • Trend > Scale > Digit * 1 2 3 4 5 Operations for Changing the Displayed Contents • If the scales of multiple channels are set to the same position, the scale of the channel assigned first to the group is displayed. Example: If the order of assignment of a group is 003.002.001, and the scale display position of all channels is set to 1, the scale of channel 3 is displayed at display position 1.
5.8 Displaying Alarm Point Marks and Color Scale Band on the Scale Display alarm point marks on the scale. Display the specified range with a color band. For a description of the function, see section 1.3. When using the Log scale (/LG1 option), set the mantissa and the exponent to set the color scale band. For the setting procedure, see the next page and section 3.13. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Alarm mark or Color scale band.
5.8 Displaying Alarm Point Marks and Color Scale Band on the Scale 1 • Color scale band Displays a specified section of the measurement range using a color band on the scale. This setting is common with the bar graph display. • Color scale band > Band area Settings Description In Displays the area inside using the color band. Out Displays the area outside using the color band. Off Disables the function. 2 3 • Color scale band > Color 4 Set the display color.
5.9 Partially Expanding the Waveform Expand a part of a waveform (shrink the other parts) on the display. * You cannot specify a channel that is set to Log scale (/LG1 option). We recommend that you display the scale when viewing partially expanded channels. The numbers for the ends of the scale and the boundary position are displayed, and you can identify the expanded and reduced areas easily. However, numbers are not displayed for other scale marks. For a description of the function, see section 1.3.
5.9 Partially Expanding the Waveform • Partial > Boundary Set the value that is to be the boundary between the reduced section and the expanded section in the range of “minimum span value + 1 digit to maximum span value – 1 digit.” For channels that are set to scaling, the selectable range is “minimum scale value + 1 digit to maximum scale value – 1 digit.” Example: Input range: –6 V to 6V. Expand: 30.
5.10 Changing the Display Layout, Clearing of the Waveform at Start, Message Display Direction, Waveform Line Width, and Grid Change the display layout, clearing of the waveform at start, waveform line width, and grid. For a description of the function, see section 1.3. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Display > Trend. Setup Items • Trend > Direction Set the display direction of the trends to Horizontal, Vertical, or Wide.
5.11 Changing the Bar Graph Display Method 1 Change the bar graph display method. For a description of the function, see section 1.3. 2 • Display Direction 3 Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Display > Bar graph. 4 5 Operations for Changing the Displayed Contents 6 • Base Position and the Number of Scale Divisions Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Bar graph.
5.11 Changing the Bar Graph Display Method When the Display Direction of the Bar Graph Is Vertical • Normal Value at the bottom of the bar graph: Span lower limit or span upper limit (or scale lower limit or scale upper limit), whichever is less Value at the top of the bar graph: Span lower limit or span upper limit (or scale lower limit or scale upper limit), whichever is greater Starting point of the bar: Bottom edge • Center Value at the bottom of the bar graph: Same as with Normal.
5.11 Changing the Bar Graph Display Method When the Display Direction of the Bar Graph Is Horizontal The span lower limit (or scale lower limit) becomes the left edge of the bar graph, and the span upper limit (or scale upper limit) becomes the right edge of the bar graph.
5.12 Changing the Background Color of the Display Change the background color of the display. This setting is applied to the operation screens. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Display > Monitor. Setup Items • Monitor > Background > Display Set the background color of the operation screen to White (default setting) or Black.
5.13 Automatically Switching Display Groups 1 Automatically switch the displayed group at a specified interval. 2 Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Display > Monitor. 3 4 5 Operations for Changing the Displayed Contents 6 Setup Items • Monitor > Scroll time Set the switching interval from the available settings between 5 s and 1 min. The groups switch in ascending order. Select whether to automatically switch on the display selection menu.
5.14 Automatically Switching Back to the Default Display Show a preset display when there is no operation for a specific time. Setup Screen Press MENU (to switch to setting mode), and select the Menu tab > Display > Monitor. Setup Items • Monitor > Jump default display Returns to a preset display if there is no key operation for a specific time. Settings Description 1min to 1h Time until switching the display. Off Disables the function. Procedure • Specifying the Display to be Shown 1.
5.15 Writing a Message When the FX Recovers from a Power Failure 1 A message is written to the trend display when the FX recovers from a power failure while memory sampling is in progress. 2 • Power-fail message 3 Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > View, Message.
5.16 Changing the Function menu and Display Selection Menu You can change the contents of the Function menu, which is displayed when you press FUNC, and the display selection menu, which is displayed when you press DISP/ENTER. Setup Screen • Function menu Press MENU (to switch to setting mode), and select the Menu tab > Menu customize > Function menu.
5.16 Changing the Function menu and Display Selection Menu 1 • Description of Function menu Items For a description of each item, see section 4.1. • Enabling/Disabling the Display Selection Menu and Sub Menu 2 Items whose menu name is white are shown. 1. Press the arrow keys to select a menu item. 2. Press the View or Hide soft key. If you press the Hide soft key, the menu name is displayed in gray, and does not appear in the display selection menu.
5.16 Changing the Function menu and Display Selection Menu • Description of the Display Selection Menus and Sub Menus Items with asterisk (*) are set to Hide by default.
Chapter 6 6.1 Saving and Loading Data Setting the Recording Conditions of the Measured Data 1 Set the method for recording the measured data. For a description of the function, see section 1.4. 2 • Data Type 3 Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > A/D, Memory. 4 5 6 Press MENU (to switch to setting mode), and select the Menu tab > Meas channel > Tag, Memory, Delay.
6.1 Setting the Recording Conditions of the Measured Data • Recording Conditions of Event Data* Press MENU (to switch to setting mode), and select the Menu tab > Data save > Event data. * When you set the type of data that you want to save to “Display,” which is the default value, “Event data” is not displayed in the sub menu. Change the Data kind setting on the A/D, Memory screen in basic setting mode. Setup Items • Memory > Data kind Settings Display E+D Event Description Records display data.
6.1 Setting the Recording Conditions of the Measured Data 1 • Event data (when recording event data) • Sample rate Select the data recording interval. Use the table under “Data length” for reference. • Mode 2 Settings Description Free Records data continuously. Single Records data when the trigger condition is met. Repeat Records data each time the trigger condition is met. 3 • Data length 4 Select the size of a record data file. The recorded data is divided by the file size specified here.
6.2 Setting the Method for Saving the Data This section explains how to select a method for saving measured data to an external storage medium. For a description of the function, see section 1.4. Setup Screen • Auto save * This is only valid on FXs that have a CF card slot. Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Security, Media save.
6.2 Setting the Method for Saving the Data 1 Setup Items • Save > Auto save * This is only valid on FXs that have a CF card slot. Settings On Off Description Automatically saves the measured data to the CF card. Specify On to enable the media FIFO function. Does not automatically save the data. Save the measured data manually to the CF card or USB flash memory (/USB1 option). 2 3 • Save > Media FIFO * This is only valid on FXs that have a CF card slot.
6.3 Using the Batch Function Set the batch function. For a description of the function, see section 1.5. Setup Screen • Batch Function Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Batch. • Data file name Press MENU (to switch to setting mode), and select the Menu tab > Data save > File header, File name. • Text Field Press MENU (to switch to setting mode), and select the Menu tab > Data save > Batch text.
6.3 Using the Batch Function 1 Setup Items • Batch > On/Off Select On to use the batch function. 2 • Batch > Lot-No. digit Select the number of digits of the lot number from 4, 6, or 8. Select Off to disable the lot number. • Batch > Auto increment Settings Description On Automatically sets the lot number of the next measurement to “the lot number of the current measurement + 1.” Off Disables the operation described above.
6.3 Using the Batch Function • Displaying Text Field Settings 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Text field soft key. The text field settings appear.
6.4 Starting and Stopping Recording and Saving Measured Data 1 This section explains how to start recording and save measured data to the internal memory. You can also save the measured data that is stored in internal memory to an external storage medium. * 2 3 This is only valid on FXs that have a CF card slot or USB interface (/USB1 option). For a description of the function, see section 1.4. Procedure • Starting the Recording (Memory Start) Press START.
6.4 Starting/Stopping the Recording and Saving the Measured data • Creating a Display Data File or an Event Data File This operation can be carried out when recording display data or when recording event data in Free mode. The file is created in the internal memory. If Auto save is set to On, the data file is saved to the CF card at the same time. 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Save display or Save event soft key.
6.4 Starting/Stopping the Recording and Saving the Measured data 1 • Stopping the Recording (Memory Stop) 2 1. Press STOP. A confirmation window is displayed. If you are using the batch function, the batch name and comment are displayed on the screen. 3 4 5 2. Select Yes using the arrow keys and press DISP/ENTER. The internal memory icon in the status display section changes to the stop icon.
6.4 Starting/Stopping the Recording and Saving the Measured data • C hanging Settings and Performing File Operations during Recording (Memory sampling) You cannot change the following settings.
6.5 Manually Saving the Measured Data (Manual Sample) 1 Save the instantaneous values of all channels (excluding those set to Skip or Off) through key operation. For a description of the function, see section 1.4. 2 Procedure 3 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Manual sample soft key. 4 Manual sampling is executed.
6.6 Saving the Screen Image Data (Snapshot) Save the current screen image data to the CF card. This operation is called snapshot, and the screen image data file is called snapshot data file. For a description of the function, see section 1.4. Procedure 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Snap shot soft key. A message indicating that the message “Execution is complete” is displayed, and the snapshot data file is saved to the CF card.
6.7 Managing the Files on the External Storage Medium 1 This section explains how to display a list of stored files and the amount of available memory, delete files and directories, and format external storage media. 2 This is only valid on FXs that have a CF card slot or USB interface (/USB1 option). Procedure • Displaying Files, Deleting Files, and Checking Available Memory on the External Storage Medium Carry out the procedure below to show the display.
6.7 Managing the Files on the External Storage Medium Deleting a File Press the arrow keys to select the file to be deleted, and press the Delete soft key. A confirmation window appears. Select Yes, and press DISP/ENTER. The file is deleted. Deleting a Directory First, delete all the files in the directory. Select the directory you want to delete. The rest of the procedure is the same as deleting a file.
6.8 Loading and Displaying Measured Data from External Storage Media 1 Load the display or event data file saved on the external storage medium and display the waveform. The loaded data is shown on the historical trend display. For the operations on the historical trend display, see section 4.3. This is only valid on FXs that have a CF card slot or USB interface (/USB1 option). 2 3 Procedure • Loading a File 1. Carry out the procedure below to show the display.
6.9 Saving/Loading the Setup Data This section explains how to save and load setup data from external storage media. This is only valid on FXs that have a CF card slot or USB interface (/USB1 option). Procedure • Saving the Setup Data 1. Carry out the procedure below to show the display. Press MENU (to switch to setting mode), and select the File tab > Save settings. Press the CF or USB soft key, and then press DISP/ENTER. 2. Set the file name.
6.9 Saving/Loading the Setup Data • Loading the Setup Data for the Setting Mode and Basic Setting Mode 1. Carry out the procedure below to show the display. Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the File/Initialize tab > Load settings. Press the CF or USB soft key*, and then press DISP/ENTER. * 1 2 When you are using a CF card and USB flash memory (/USB1 option). 3 4 5 2.
Blank Page
Chapter 7 7.1 Customizing Actions Using the Event Action and Remote Control Functions (/R1 and /PM1 Options) Setting the Event Action Function (Including the remote control function of the /R1 and / PM1 options and the USER key) 1 A specified action is carried out when an event occurs. This function is called event action. Follow the procedure in this section to also set the remote control function (/R1 and /PM1 options) and the USER key. For a description of the function, see section 1.6.
7.1 Setting the Event Action Function (Including the remote control function of the /R1 and /PM1 options and the USER key) Setup Items • Logic box number You can set up to 40. • Event action > Event The condition to execute the action. Settings Description None Not use. Remote Select the remote control input terminal number. Relay Select the alarm output relay number. During Edge operation, a change from deactivated to activated is an event. Switch Select the internal switch number.
7.1 Setting the Event Action Function (Including the remote control function of the /R1 and /PM1 options and the USER key) • Timer Timer used by event action. Used also in the TLOG computation of the computation function. * The timer cannot be changed while memory sampling or computation is in progress. 1 • Timer No. 2 When Using an Absolute Timer • Mode 3 Up to four timers (1 to 4) can be set. Select Absolute. • Interval 4 Select the interval from the available settings between 1min to 24h.
7.1 Setting the Event Action Function (Including the remote control function of the /R1 and /PM1 options and the USER key) Procedure • Resetting the Relative Timer 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Timer reset soft key. 3. Press the soft key corresponding to timer you want to reset. Select All to reset all timers. The relative timer is reset. Explanation • Resetting the Relative Timer Restarts the timer.
7.2 Setup Examples of Event Action 1 Example 1: Starting/Stopping the Memory Sampling through Remote Control (/R1 Option) 2 Starts/Stops the memory sampling when a signal is applied to remote control input terminal 2. Use logic box number 1. 3 • Setup Screen and Setup Items Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event action > Event action.
7.2 Setup Examples of Event Action Example 3: Saving the Data Every Day at Hour 17 Save the recorded data to the CF card every day at hour 17. Use logic box number 3. Use match time condition 1. • Setup Screen and Setup Items Logic box number 3 Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event action > Event action. Match Time Condition Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event action > Match time timer.
7.2 Setup Examples of Event Action 1 Example 4: Releasing the Alarm Output Using the USER Key (Alarm Acknowledge Operation) Release the activated alarm output by pressing the USER key. Use logic box number 4. • Setup Screen and Setup Items Press MENU (to switch to setting mode), and select the Menu tab > Timer, Event action > Event action. 2 3 4 5 6 Press the USER key to release the activated alarm indication and relay output.
Blank Page
Chapter 8 8.1 Using the Security Function Disabling the Key Operation (Key Lock Function) 1 Disable the key operation. For a description of the function, see section 1.7. 2 • Selecting the Key Lock Function 3 Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Security, Media save.
8.1 Disabling the Key Operation (Key Lock Function) Procedure • Locking the Keys 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Keylock soft key. The key lock is activated. The key lock icon appears in the status display section. • Releasing the Key Lock 1. In the operation mode, press FUNC. The Function menu appears. 2. Press the Keylock soft key. A window appears for you to enter the password. 3. Enter the password and press DISP/ENTER.
8.2 Enabling Only Registered Users to Operate the FX (Login Function) With the login function, only registered users can operate the FX. For a description of the function, see section 1.7. 2 Setup Screen 3 • Login Function Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Security, Media save. * 1 On FXs that do not have a CF card slot, the sub menu item is “Security.
8.2 Enabling Only Registered Users to Operate the FX (Login Function) • Registering Users Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Login > User settings. • User Privileges Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Login > Authority of user >Key action, Media* or Action of Function.
8.2 Enabling Only Registered Users to Operate the FX (Login Function) 1 • User basic settings > Operation without login Sets the operation that the user can carry out when logged out. Settings Description Off Only login operation is available. Display Allows the user to switch the operation screen in addition to the login operation. • Admin number Up to five administrators can be registered. Be sure to register at least one administrator.
8.3 Logging in and Logging Out This section explains the procedure to log into the FX using keys. For the procedure for using communication commands to log into the FX, see the Communication Interface User’s Manual, IM 04L21B01-17EN. Procedure • Logging In 1. In the operation mode, press FUNC. A list of registered user names appears. 2. Press the arrow keys to select a user name, and press DISP/ENTER. A window appears for you to enter the password. 3.
8.3 Logging in and Logging Out 1 • Changing the Password Using Keys 1. In the operation mode, press FUNC. 2 The Function menu appears. 2. Press the Password change soft key. A window appears for you to enter the current password. 3. Enter the current password, select ENT, and press DISP/ENTER. 3 A window appears for you to enter the new password. 4. Enter the new password, select ENT, and press DISP/ENTER. A window appears for you to enter the new password again. 4 5.
Blank Page
Chapter 9 9.1 Computation and Report Functions (/M1, /PM1, and /PWR1 Options) Setting the Expression, Measurement Range, Alarm, Tag, and Data Storage on Computation Channels This section explains how to set a computation channel’s expression, measurement range, tag, alarm, and recording On/Off. You cannot set expressions or constants while memory sampling or computation is in progress. For a description of the function, see section 1.8. For the power measurement (/PWR1 option) expression, see section 3.
9.1 Setting the Expression, Measurement Range, Alarm, Tag, and Data Storage on Computation Channels • Conditions of TLOG Computation and Rolling Average Press MENU (to switch to setting mode), and select the Menu tab > Math channel > TLOG, Rolling average. • Display for Computation Errors and Handling of Overflow Data in Statistical Computation Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Math.
9.1 Setting the Expression, Measurement Range, Alarm, Tag, and Data Storage on Computation Channels 1 • Span_L, Span_U Set the measurement range. Selectable range of values: –9999999 to 99999999 Selectable decimal places: X.XXXX, XX.XXX, XXX.XX, XXXX.X • Unit Set the unit of the computed value (Up to 6 characters, Aa#1 2 ). • Alarm The available alarm types are high limit alarm, low limit alarm, delay high limit alarm, and delay low limit alarm.
9.1 Setting the Expression, Measurement Range, Alarm, Tag, and Data Storage on Computation Channels • Rolling average • On/Off To take the rolling average of the measured results, select On. • Interval Select the sampling interval when taking the rolling average from the following: The sampling interval takes on a value that is an integer multiple of the scan interval. For example, if the sampling interval is set to 5 s when the scan interval is 2 s, the actual sampling interval is 6 s.
9.2 Writing Expressions 1 This section explains the meaning and how to write expressions. Common Items 2 Follow the rules below when writing expressions. • Use up to 120 characters to write expressions. • The precedence of computing terms can be specified using parentheses. • Specify the channels in the expression using channel numbers. Example: 1, 12, and 101 Do not include channels that are set to Log scale (/LG1 option) in a computation channel expression.
9.2 Writing Expressions Order of Precedence in Computations The order of precedence of computation in expressions is as follows: Type Computing Element Function (high order of precedence) ABS(), SQR(), LOG(), LN(), EXP(), TLOG.MAX(), TLOG.MIN(), TLOG.AVE(), TLOG.SUM(), TLOG.P-P(), CLOG.MAX(), CLOG.MIN(), CLOG.AVE(), CLOG.SUM(), CLOG.
9.2 Writing Expressions 1 Four Arithmetic Operation Expression Example • Addition • Subtraction 001+002 (Determines the sum of the measured values of channel 1 and channel 2.) 001–002 (Determines the difference of the measured values of channel 1 and channel 2.) • Multiplication 001*K03 (Multiplies constant K03 to the measured value of channel 1.) • Division 001/K02 (Divides the measured value of channel 1 by constant K02.
9.2 Writing Expressions Logical Computation Checks whether the two data values, e1 and e2 (e1 only for NOT), are zeroes or nonzeroes, and computes according to the conditions. AND Logical product (Syntax) e1ANDe2 (Condition) If the two data values e1 and e2 are both non-zeroes, the computed result is “1.” Otherwise, it is “0.
9.2 Writing Expressions 1 TLOG Computation In the explanation below, an expression containing a computing element, an internal switch (S), a relay (I), a flag (F), and power measurement elements—voltage, current, frequency, and power factor—cannot be written in e1. In addition, only one TLOG computation can be specified in a single computing equation. 2 TLOG.MAX( ) Maximum value (Syntax) TLOG.MAX(e1) (Condition) Determines the maximum value of channel e1. 3 TLOG.
9.2 Writing Expressions CLOG Computation Only data of measurement channels and computation channels can be used in the CLOG computation. Up to 30 channels can be written in the parentheses. In the explanation below, an expression containing a computing element cannot be written to e1, etc. In addition, only one CLOG computation can be specified in a single computing equation. CLOG.SUM( ) Sum value (Syntax) (Condition) CLOG.SUM(e1.e2.
9.2 Writing Expressions 1 Special Computation PRE( ) (Syntax) (Condition) HOLD(a):b (Syntax) (Condition) RESET(a):b (Syntax) (Condition) CARRY(a):b (Syntax) (Condition) (Description) PRE(e1) Determines the previous value of e1. 2 HOLD(a):b When a is zero, b is carried out to derive the computed value. Otherwise, the previous computed value is held. 3 RESET(a):b When a is zero, b is carried out to derive the computed value.
9.3 Displaying the Computation Channels Computation channels can be assigned to groups and displayed in a similar manner to measurement channels. For a description of the function, see section 1.8. Setup Screen • Color Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Color. • Zone Display and Scale Display Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Zone, Scale.
9.3 Displaying the Computation Channels • Partial Expanded Display Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Partial. * The Partial command appears in the menu if you set Partial to On in basic setting mode under View, Message on the Environment tab. 1 2 3 4 5 • Alarm Marks Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Alarm mark.
9.3 Displaying the Computation Channels Setup Items • Group of channel, First-CH, and Last-CH Select the target channel range. • Color See section 5.5. • Zone See section 5.6. • Partial See section 5.9. • Bar graph See section 5.11. • Scale See section 5.7. • Alarm mark color and Color scale band See section 5.8.
9.4 Starting/Stopping Computation, Resetting Computation, and Releasing Computation Data Dropout Display Setup Screen • Action Taken When the START Key Is Pressed Press MENU (to switch to setting mode), and select the Menu tab > Math channel > Math start action. 1 2 3 4 5 6 Setup Items 7 • Math start action > Math start Settings Description Off Does not start the computation even when the START key is pressed. Start Starts the computation when the START key is pressed.
9.4 Starting/Stopping Computation, Resetting Computation, and Releasing Computation Data Dropout Display • Stopping the Computation • Stopping the Computation Simultaneously with the Memory Sampling 1. Press STOP. A confirmation dialog box appears. 2. Select Mem+Math and press DISP/ENTER. The memory sampling and computation stop, and the computation icon in the status display section disappears. • Stopping Only the Computation 1. In the operation mode, press FUNC. The Function menu appears. 2.
9.5 Creating Reports 1 Set how the reports are created. For a description of the function, see section 1.8. 2 • Report Computation Type 3 Setup Screen Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Environment tab > Report. 4 5 6 • Report Type and Time of Creation Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic setting mode), and select the Menu tab > Report > Basic settings.
9.5 Creating Reports Setup Items • Report > Report select > 1, 2, 3, and 4 Select the type of data to output as reports. The only data type that can be set more than once is Off. You cannot set 1 to Off. Settings Description Off Does not output reports. Ave Outputs the average value. Max Outputs the maximum value. Min Outputs the minimum value. Sum Outputs the sum value. Inst Outputs the instantaneous value.
9.5 Creating Reports 1 • Report channel number The report is output in order by this number. • Report channel number > On/Off 2 Select On for the report channels to be used. • Report channel number > Channel Set the channel to assign to the report channel. All channels can be assigned, but reports are not created for channels set to Skip or Off even if they are assigned. Errors are returned for any reports for channels that are set to Log scale (/LG1 option).
Blank Page
Chapter 10 Troubleshooting 10.1 A List of Messages 1 There are cases in which error codes and messages are displayed on the screen during operation. A list of the possible error codes and messages are given in the table below. Communication error codes and messages are also listed. Error responses to communication commands are output in English. Errors Related to Parameter Settings • Setting Errors Code 1 2 3 4 5 6 7 8 9 11 21 22 23 24 25 27 28 30 31 35 36 37 38 40 Explanation/Countermeasures/Ref.
10.1 A List of Messages Code 41 Message There is no specified input channel. 42 Exceeded the number of channels which can be set. 43 A channel number cannot repeat in a group. 45 46 There is no character string saved in the clipboard. The character string saved in the clipboard is too long. 47 Start and end time cannot match. 48 Invalid or missing DST time settings. 49 “Secondary rated power * 1.2 * VT ratio * CT ratio” is greater than 10GW.
10.1 A List of Messages Message Password is incorrect. 92 93 Press [ESC] key to change to the operation mode. String including space or all space cannot be specified. 94 More than one address cannot be specified. 95 Number entered exceeds channel number range. Use another command. 96 This menu is locked. 100 IP address doesn’t belong to class A, B, or C. 101 The result of the masked IP address is all 0s or 1s. 102 SUBNET mask is incorrect.
10.1 A List of Messages • Code 150 Execution Errors Message This action is not possible because sampling is in progress. 151 This action is not possible during sampling or calculating. 152 153 154 This action is not possible because saving is in progress. This action is not possible because formatting is in progress. Message not accepted because message limit was reached. 155 The message is not written while sampling is stopped. 156 There are no channels to be saved to the memory.
10.1 A List of Messages Operation Errors Code 200 Message Operation aborted because an error was found in media. 201 Not enough free space on media. 202 210 211 Media is read-only. Media has not been inserted. Media is damaged or not formatted. 212 Format error. 213 214 The file is read-only. There is no file or directory. 215 Exceeded the allowable number of directories or files. 216 The file or directory name is incorrect. 217 Unknown file type. 218 219 This directory or file now exists.
10.1 A List of Messages Communication Application Errors • Errors Related to E-mail and Web Server 260 IP address is not set or ethernet function is not available. 261 SMTP server is not found. 262 Cannot initiate E-mail transmission. 263 Sender’s address rejected by the server. 264 Some recipients’ addresses are invalid. 265 SMTP protocol error. 266 Ethernet cable is not connected. 267 Could not connect to SMTP server. 268 269 E-mail transmission request failed. E-mail transfer error.
10.1 A List of Messages • 1 Errors Related to the FTP Client, SNTP, and DHCP For a description of the FTP client function of the FX, see the Communication Interface User’s Manual, IM 04L41B01-17EN. The detail code does not appear in the error message on the screen. You can view the code on the FTP log display of the FX or using the FTP log output via communications.
10.1 A List of Messages Code 283 284 10-8 Message FTP command was not accepted. Further details are provided by the character string that appears after error code 283. Character String and Details USER Failed to verify the user name. Check the user name setting. PASS Failed to verify the password. Check the password setting. ACCT Failed to verify the account. Check the account setting. TYPE Failed to change the transfer type. Check that the server supports the binary transfer mode.
10.1 A List of Messages Code 285 286 290 291 292 1 2 3 4 5 6 7 8 9 10 Troubleshooting 293 Message FTP data connection error. Further details are provided by the character string that appears after error code 285. Character String and Details SOCKET Failed to create a socket for the transfer connection.2 BIND Failed the transfer connection command.2 CONNECT Failed the transfer connection.2 LISTEN Failed the transfer connection reception.2 ACCEPT Failed to accept the transfer connection.
10.1 A List of Messages Code 294 295 296 297 10-10 Message No time correction because excess time deviation with SNTP server. Further details are provided by the character string that appears after error code 294. Character String and Details OVER This error occurs when periodic SNTP is executed by the auto setting of the clock and the clock is not adjusted because the time difference between the FX and the SNTP server is greater than or equal to 10 minutes.
10.1 A List of Messages Code 298 1 Message Deletion of the hostname to the DNS server failed. Further details are provided by the character string that appears after error code 298. Character String and Details INTERNAL Failed to delete the host name (transmission error, reception timeout, etc.). FORMERR Failed to delete the host name (format error: DNS message syntax error). SERVFAIL Failed to delete the host name (server failure: DNS server processing error).
10.1 A List of Messages Communication Errors For information about the FX communication functions, see the Communication Interface User’s Manual, IM 04L41B01-17EN. • Errors during Setting and Basic Setting Modes, Output Communication Command Execution, and Setup Data Loading Code 300 301 302 303 350 Message Command is too long. Too many number of commands delimited with ‘;’. This command has not been defined. Data request command can not be enumerated with sub-delimiter.
10.1 A List of Messages • 1 Maintenance and Test Communication Command Errors An English error message is returned via the communication interface. These messages are not displayed on the FX. Code 390 391 392 393 394 395 396 397 398 • Message Command error. Delimiter error. Parameter error. No permission. No such connection. Use ‘quit’ to close this connection. Failed to disconnect. No TCP control block. Format error.
10.1 A List of Messages Status Messages Code 500 501 503 504 505 506 508 509 510 511 513 514 515 516 520 521 530 531 532 533 534 535 542 543 550 551 552 10-14 Message Execution is complete. Please wait a moment... Data are being saved to media... File is being loaded from media... Formatting... Memory save to media was interrupted. There is no file or directory. Press [DISP/ENTER] key to display file name. Range cannot be changed during sampling or calculating.
10.1 A List of Messages Code 560 561 562 563 564 565 566 567 2 3 4 5 6 7 8 9 10 Troubleshooting 568 1 Message Now connecting to SNTP server. Now adjusting the time. Ethernet cable is disconnected. Further details are provided by the character string that appears after error code 562. Character String and Details ON Detected that an Ethernet cable was connected. OFF Detected that an Ethernet cable was disconnected. The command is sent to DHCP.
10.1 A List of Messages Warning Messages Code 600 601 610 614 Message Measured data and Settings have been initialized. Measured data have been initialized. This username is already registered. Calibration settings are reset because of range setting change. Ref. Section – – See section 8.2. See section 3.9. System Errors Servicing is required when a system error occurs. If this happens, contact your nearest YOKOGAWA dealer. Code 901 902 910 915 Message ROM failure. RAM failure.
10.2 Troubleshooting 1 Does not function (nothing is displayed). Is the power switch turned ON? Does the switch work properly? NO 2 3 Turn ON the power properly. YES Is the power supply connected properly? 4 NO Connect properly. 5 YES 6 Is the power supplied properly? NO Supply the power at the specified voltage and frequency. 7 YES 8 Contact your nearest YOKOGAWA dealer.
10.2 Troubleshooting • Large measurement errors • Trend or digital wave value fluctuation • Trend going off the scale beyond either 0% or 100% Does the input meet the specifications? NO Change the input wiring to meet the specifications. Section 13.
10.2 Troubleshooting 1 Display and other functions do not work properly. Taking measures against noise? NO YES 2 • Move the input and communication wires away from the noise source. • Ground the recorder. • Use shielded cables for input and communication wires. • Insert an isolation transformer into the power line. • Insert a power line filter into the power line. • If an inductive load is used in the alarm output line, insert a serge suppressor in the line.
Blank Page
Chapter 11 Maintenance 11.1 Periodic Inspection 1 Check the operation periodically to keep the FX in good working order. Perform the following inspections, and then contact your YOKOGAWA dealer if necessary. • Is the display and storage functioning properly? If not, see chapter 10, “Troubleshooting.” • Has the brightness of the LCD backlight deteriorated? 2 Service Life of Consumable Parts 4 3 The service lives for parts that wear down are shown in the following table.
11.2 Calibrating the FX It is recommended that the FX be calibrated once a year to assure its measurement accuracy. Calibration service is also provided by YOKOGAWA dealers. For details, contact your nearest YOKOGAWA dealer. Required Instruments Calibration instruments with the following resolution are required for calibrating the FX. Recommended Instruments • DC voltage standard: • Decade resistance box: Fluke 9100 or equivalent Main specifications Output accuracy: ±(0.
11.2 Calibrating the FX 1 Temperature Measurement Using an RTD (Example for the FX1012) 2 Input terminal The resistance of three lead wires must be equal.
Blank Page
Chapter 12 Installation and Wiring 12.1 Installation Location 1 Install the FX indoors in an environment that meets the following conditions: 2 • Instrumentation Panel The FX is designed to be installed in an instrumentation panel. • Well-Ventilated Location To prevent overheating, install the FX in a well-ventilated location. For the panel cut dimensions when arranging multiple FXs, see section 12.3.
12.2 Installation Procedure Use a steel panel that is 2 mm to 26 mm thick. 1. Insert the FX through the front of the panel. 2. Mount the FX to the panel using the included mounting brackets as shown in the figure below. • Use two mounting brackets to support the top and bottom or the left and right sides of the case (remove the stickers that are covering the holes before you attach the brackets). • Follow the procedure below to mount the FX to the panel.
12.3 External Dimensions and Panel Cut Dimensions 1 2 External dimensions Unit: mm (approx. inch) If not specified, the tolerance is ±3%. However, in cases of less than 10mm, the tolerance is ±0.3 mm. Mounting bracket (*1) 4 (*2) 108.0 (4.25) Panel thickness (*3) (Dimensions after attaching the mounting bracket) 5 6 12.6 (0.50) 136.5 (5.37) 161.7 (6.37) ± 0.3 (0.01) 2 to 26 (0.08 to 1.02) 72.0 (2.83) 144.0 (5.67) 72.0 (2.83) 12.6 (0.50) 22.2 (0.87) 161.7 (6.37) 161.7 (6.37) 144.0 (5.
12.4 Input Signal Wiring WARNING • To prevent electric shock while wiring, make sure that the power supply is turned off. CAUTION • Applying a strong tension to the input and output signal cables connected to the FX may damage the cables or the FX terminals. To avoid applying tension directly to the terminals, fix all cables to the rear of the mounting panel. • To prevent fire, use signal cables with a temperature rating of 70°C or more.
12.4 Input Signal Wiring Wiring Procedure A terminal cover is attached to the measuring input terminal block on the rear panel. A label indicating the terminal arrangement is affixed to the cover. 1. Turn the recorder off, and remove the terminal cover. To remove the cover, pull the right-and-left pawls. 2. Connect the signal cables to the terminals. Recommended torque for tightening the screws 0.5 N•m 1 2 3 3. Replace the terminal cover.
12.
12.4 Input Signal Wiring TC input DC voltage input or DI (on/off) input – + – + DC voltage input 1 Compensating lead wire + 2 – 3 RTD input b B 4 DC current input A – B Lead wire resistance per wire of 10 Ω or less. Make the resistances of the three wires equal. A b + 5 + DC current input 6 – Shunt resistor Example: For 4 to 20 mA input, use a shunt resistor of 250 Ω ± 0.1%. 7 8 Note RTD input terminals A and B are isolated on each channel.
12.5 Optional Terminal Wiring WARNING • To prevent electric shock while wiring, make sure that the power supply is turned off. • If a voltage of more than 30 VAC or 60 VDC is to be applied to the output terminals, use ring-tongue crimp-on lugs with insulation sleeves on all terminals to prevent the signal cables from slipping out when the screws become loose.
12.
12.5 Optional Terminal Wiring The following figures show the terminal positions for each option when only that option is installed. Even if you have installed a number of options, the individual terminal positions of the options do not change (except for the case where you have installed both the /TPS2 and /A1 options; in this case, the /A1 terminal positions are different). NC Symbols such as “NC” indicate the terminal functions.
12.5 Optional Terminal Wiring 1 Alarm Output Terminal (/A1, /A2, and /A3), FAIL Output Terminal and Memory End Output Terminal (/F1) Output format: Contact rating: Relay contact 250 VAC (50/60 Hz)/3 A, 250 VDC/0.
12.5 Optional Terminal Wiring Serial Communication Interface (/C2 and /C3) 1 2 3 4 5 6 7 8 9 (Male) Connecting to the RS-232 Connector (/C2) 2 3 5 7 Data received from the PC. Input signal to the FX. Data transmitted to the PC. Output signal from the FX. Signal ground. Handshaking signal when receiving data from the PC. Output signal from the FX. 8 CS (Clear to Send) Handshaking signal when transmitting data to the PC. Input signal to the FX. * Pins 1, 4, 6, and 9 are not used.
12.5 Optional Terminal Wiring Checking the Connection Status on the FX Display • Checking the Connection Status in the Status Indication Section of the FX Display You can use the Ethernet Link indicator that is located on the right side of the status indication display section of the basic setting mode display to check the connection status of the Ethernet interface. To display the basic setting mode display, press MENU to display the setting menu, and then hold down FUNC for 3 seconds or more.
12.5 Optional Terminal Wiring Single-phase three-wire system For a single-phase three-wire system, connect wires to the terminal block as follows.
12.6 Wiring the Power Supply 1 Precautions to Be Taken While Wiring the Power Supply Make sure to follow the warnings below when wiring the power supply. Failure to do so may cause electric shock or damage to the instrument. 3 WARNING • To prevent electric shock, ensure that the power supply is turned off. • To prevent fire, use 600 V PVC insulated wires (AWG20 to AWG16; JISC3307) or wires or cables with equivalent or better performance.
12.6 Wiring the Power Supply Wiring Procedure 1. Turn off the FX power supply, and then remove the transparent power supply terminal cover. 2. Connect the power cord and the protective ground cord to the power supply terminal. Use ring-tongue crimp-on lugs (designed for 4 mm screws) with insulation sleeves. The appropriate tightening torque for the screws is 1.4 to 1.5 N•m. Terminal arrangement Other than /P1 Protective grounding cord /P1 Power cord 3.
Chapter 13 Specifications 13.1 Signal Input and Alarms 1 Measurement Input Item 2 Specifications Number of inputs, scan interval, and A/D integration time No. of Measurement Channels 2 4 6 8 10 12 Model FX1002 FX1004 FX1006 FX1008 FX1010 FX1012 Scan Interval A/D converter integration time 125 ms, 250 ms AUTO1, 50 Hz, 60 Hz 1 s, 2 s, 5 s AUTO1, 50 Hz, 60 Hz, 100 ms2 1 AUTO: The FX automatically switches between 50 Hz and 60 Hz depending on the power supply frequency.
13.1 Signal Input and Alarms Item Thermocouple burnout Specifications Burnout upscale/downscale selectable (for each channel). Normal: 2 kΩ or less, Burnout: 100 kΩ or more (parallel capacitance of 0.01 µF or less) Detection current: Approx. 10 µA 1-5 range burnout Burnout upscale/downscale selectable (for each channel).
13.2 Display 1 Display Item Display* Specifications 5.7-inch TFT color LCD (240 × 320 dots) Brightness 8 levels Backlight saver function Dim or turn off the LCD backlight if there is no key operation for a specified time. 2 3 * A section of the LCD monitor may contain pixels that are always on or off. The brightness of the LCD may also not be uniform due to the characteristics of the LCD. This is not a malfunction.
13.2 Display Item Specifications Information display Alarm summary display Displays a log of up to 1000 alarms. Specify an alarm with the cursor and jump to the corresponding section on the historical trend display. Message summary display Time and content of up to 450 messages (including 50 add messages) Specify a message with the cursor and jump to the corresponding section on the historical trend display. Memory summary display Displays the information of the data in the memory.
13.2 Display 1 Other Displayed Information Item Specifications Tag display Tag Up to 16 characters Displayable characters: Alphanumeric, katakana, hiragana, Hangul, Cyrillic, kanji, and Simplified Chinese characters. Message Write messages to the trend display.
13.3 Data Saving Function Configuration Item Internal memory Medium Specifications Temporarily saves various types of data. Flash memory External storage medium (on FXs with a CF card slot) Medium CF card Format FAT32 or FAT16 Data Type Item Specifications FX data types and file name extensions Data Type Extension Notes Display data Event data Manual sampled data Screen image data Setup data Report data /M1, /PM1, and /PWR1 .DAD .DAE .DAM .PNG .PDL .
13.
13.4 Other Standard Functions Event Action Function Item Specifications Event action Execute a specified operation when a given event occurs. Number of settings 40 Events Timer Match time timer Remote control input, etc. Number of timers: 4 Number of timers: 4 Action Specify memory start/stop, alarm ACK, etc. There are limitations on the combinations of events and actions.
13.4 Other Standard Functions 1 Batch Function Item Specifications Function Data management using batch names. Enter text fields and batch comments in the data file. Batch name Structure Added to the file name of the display data and event data. Batch number (up to 32 characters) + lot number (up to 8 digits) Text field dds text to the display data and event data. There are 8 available text fields. Up to 20 title A characters and 30 other characters can be entered per field.
13.5 Options Alarm Output Relay (/A1, /A2, /A3, and /A4A) Item Specifications Action Number of outputs Relay contact rating Output format Relay operation Outputs relay contact signals from the terminals on the rear panel when alarms occur. 2 (/A1), 4 (/A2), 6 (/A3), and 12 (/A4A) 250 VAC (50/60 Hz)/3 A, 250 VDC/0.1 A (for resistance load) 2 (/A1), 4 (/A2), 6 (/A3): NO-C-NC, and 12 (/A4A): NO-C Energized/deenergized, AND/OR, hold/non-hold, and reflash settings are selectable.
13.5 Options 1 FAIL/Status Output Relay (/F1) Item Specifications FAIL output Relay operation Relay contact output on CPU error Energized during normal operation and de-energized on system error. Status output Output a relay contact signal when a selected condition occurs.
13.5 Options Extended Input (/N3F) Item Specifications Measurement/display accuracy Under standard operating conditions Input Type Measuring Range Kp vs Au7Fe 0.0 to 300.0 K PLATINEL PR40-20 0.0 to 1400.0°C 0.0 to 1900.0°C Thermocouple NiNiMo W/WRe26 0.0 to 1310.0°C 0.0 to 2400.0°C Type N (AWG14) 0.0 to 1300.0°C XK GOST –200.0 to 600.0 RTD1 Ni100 (SAMA) Ni100 (DIN) Ni120 Pt100 GOST Cu100 GOST Cu50 GOST Pt200 (WEED) –200.0 to 250.0°C –60.0 to 180.0°C –70.0 to 200.0°C –200.0 to 600.0°C –200.
13.5 Options 1 24 VDC Transmitter Power Supply (/TPS2 and /TPS4) Item Specifications Number of loops 2 (/TPS2) or 4 (/TPS4) Output voltage 22.8 to 25.2 VDC (under rated load current) Rated output current 4 to 20 mADC Max. output current 25 mADC (overcurrent protection operation current: approx. 68 mADC) Allowable conductor resistance RL ≤ (17.8 – minimum transmitter operation voltage)/0.02 A where 17.
13.5 Options DC/AC 24 V power supply (/P1) Item Specifications Rated supply voltage 24 VDC and 24 VAC (50/60Hz) Allowable power supply voltage range 21.6V to 26.4 VDC/AC Insulation resistance Between power terminal and earth: 20 MΩor greater at 500 VDC.
13.5 Options Power Monitor (/PWR1) 1 Unless otherwise specified, the performance values listed here were recorded under the following standard operating conditions: 23 ± 2°C, 55 ± 10%RH; power supply frequency: 50/60 Hz ± 1% or less; rated input: ±1% or less, power factor: 1 ± 1% or less; warm-up time: 30 minutes or more; and a location in which oscillations and other factors do not affect the operation of the instrument.
13.5 Options Item Specifications Measurement accuracy he performance values listed here were recorded under the following standard operating T conditions: 23 ± 2°C, 55 ± 10%RH; power supply frequency: 50/60 Hz ± 1% or less; rated input: ± 1% or less, power factor: 1 ± 1% or less; warm-up time: 30 minutes or more; and a location in which vibrations and other factors do not affect the operation of the instrument. Active power (W): ±1.0% of range Voltage (V): ±1.0% of range Current (A): ±1.
13.6 General Specifications 1 Construction 2 Item Mounting Mounting angle Allowable panel thickness Material Color Specifications Flush panel mounting (on a vertical plane) Inclined backward up to 30 degrees from a horizontal plane. 2 to 26 mm Case: Metal plate Bezel and display cover: Polycarbonate Case: Grayish blue green (Munsell 2.0B5.0/1.7 or equivalent) Bezel: Charcoal gray light (Munsell 10B3.6/0.
13.
13.6 General Specifications Standard Performance 1 Item Specifications Measurement/display accuracy Standard operating conditions: Temperature: 23 ± 2°C Humidity: 55 ± 10%RH Power supply voltage: 90 to 132 or 180 to 250 VAC Power supply frequency: 50/60 Hz ± 1% Warm-up time: At least 30 minutes. Other ambient conditions such as vibration should not adversely affect the operation.
13.6 General Specifications Item Specifications Maximum input voltage ±60 VDC (continuous) Input resistance 1 V range or less and TC: 10 MΩ or more 2 V range or higher: Approx. 1 MΩ Input source resistance Volt, TC 2 kΩ or less RTD input 10 Ω or less per wire (The resistance of all three wires must be equal).
13.7 External Dimensions 1 See section 12.3.
Blank Page
Chapter 14 Setup Items 14.1 Setting Mode Menu Map and Setup Items 1 Run Modes 2 Mode Transition Diagram 3 Power on Operation mode Setting mode Basic setting mode 4 End menu > DISP/ENTER or ESC > DISP/ENTER 5 Operation display MENU key Setting menu display Hold down FUNC for 3 s Basic setting menu display 6 MENU key or ESC key DISP/ENTER key MENU key or ESC key DISP/ENTER key Setup display ESC key 7 8 Setup display 9 The FX has three modes.
14.
14.
14.
14.
14.1 Setting Mode Menu Map and Setup Items Meas channel > Color Setup Item Group of channel Color Selectable Range or Selections Default Value Setting Channel number 001 to 006 Red/Green/Blue/B.violet/Brown/Orange/Y.green/Lightblue/Violet/ Red to orange Gray/Lime/Cyan/Darkblue/Yellow/Lightgray/ Purple/Black/Pink/L.brown/L.green/Darkgray/Olive/ DarkCyan/S.
14.
14.1 Setting Mode Menu Map and Setup Items Math channel > Color Except for the channel numbers, setup items and values are the same as those for measurement channels. Math channel > Zone, Scale Except for the channel numbers, setup items and values are the same as those for measurement channels. Math channel > Bar graph Except for the channel numbers, setup items and values are the same as those for measurement channels.
14.
14.1 Setting Mode Menu Map and Setup Items Timer, Event action > Event action Setup Item Logic box number Event Remote > Remote number Relay > Relay number Switch > Switch No. Timer > Timer No. Match time timer > Timer number Action Message > Message No. Message > Write to Message > Group number Group > Group number Flag > Flag number TimerReset > Timer No.
14.1 Setting Mode Menu Map and Setup Items 1 Power Setup Item VT ratio CT ratio Low-cut power Selectable Range or Selections Numerical value (1.0 to 6000.0) Numerical value (0.05 to 32000) Numerical value (0.05 to 20.00) Default Value Setting 1.0 1.00 0.
14.2 Basic Setting Mode Menu Map and Setup Items Run Modes Mode Transition Diagram Power on Operation mode Setting mode Basic setting mode End menu > DISP/ENTER or ESC > DISP/ENTER Operation display MENU key Setting menu display Hold down FUNC for 3 s Basic setting menu display MENU key or ESC key DISP/ENTER key MENU key or ESC key DISP/ENTER key Setup display ESC key Setup display The FX has three modes. 14-12 Mode Description Operation mode A mode for performing measurements.
14.
14.
14.
14.
14.
14.2 Basic Setting Mode Menu Map and Setup Items Menu tab Alarm > Basic settings Setup Item Reflash Rate of change > Decrease Rate of change > Increase Indicator Selectable Range or Selections On/Off 1 to 32 1 to 32 Hold/Nonhold Default Value Setting Off 1 1 Nonhold Selectable Range or Selections None/S01/S01-S02/. . . /S01-S29/S01-S30 None/I01/I01 to I02/. . .
14.
14.
14.2 Basic Setting Mode Menu Map and Setup Items 1 Communication (Ethernet) > Server > Server modes Setup Item FTP Web SNTP Modbus Selectable Range or Selections Use/Not Use/Not Use/Not Use/Not Default Value Setting Not Use Not Not 2 3 Communication (Ethernet) > Server > Allowed Modbus clients Setup Item Use/Not Client number On/Off Allowed IP Address Selectable Range or Selections Use/Not Numerical value (1 to 10) On/Off Numerical value (0.0.0.0 to 255.255.255.
14.
14.2 Basic Setting Mode Menu Map and Setup Items 1 Communication (Ethernet) > FTP Client > FTP connection Setup Item FTP connection FTP server name Port number Login name Password Account PASV mode Initial path Selectable Range or Selections Primary/Secondary 64 characters or less Numerical value (0 to 65535) 32 characters or less 32 characters or less 32 characters or less On/Off 64 characters or less Default Value Setting Primary − 21 − ******. . .
14.
14.
Blank Page
Appendix Appendix 1 File Size of Display Data and Event Data 1 The maximum size of a single display data file or event data file is 8 MB. This section takes a look at some data recording cases and calculates the approximate sampling time required to create an 8 MB file for each case. Use this as a guideline for the sampling time of a single data file.
Appendix 1 File Size of Display Data and Event Data Display data and event data Display data file size = 8 MB Event data file size = 8 MB You can use these figures to calculate the sampling time per file in the same manner as was used for the case of “only display data” or “only event data.
Appendix 2 Types of Data Files That the FX Can Create and How They Can Be Used 1 This section will explain the types of data files that the FX can create and how they can be used.
Appendix 3 Text File Data Format This section explains the format of text files. The FX can create the following text files: manual sampled data files and report files. In the explanation below, CRLF represents a terminator. Format of the Manual Sample Data File • The manual sampled data is output using numerical values and strings in text format delimited by tabs. • Values of measurement channels set to Skip and computation channels set to Off are not output.
Appendix 3 Text File Data Format 1 File Output Example Below is a manual sample data example of channels 1, 2, 3, and 4. YREC Manual Sample Data Model Language Code File Status Serial No. File Header Ch Tag Unit 2005/10/01 08:57:22 2005/10/01 08:57:28 2 Version 1.00.00 FX1000 shift-JIS Progress S5E701600 CH001 abc °C 213.8 208.6 CH002 def V 0.517 0.494 3 CH003 hij m3/h 368.4 363.0 4 CH004 klmn % 68.9 68.
Appendix 3 Text File Data Format Report File Format • The hourly, daily, weekly, and monthly reports are output using numeric values and strings in text format delimited by tabs. • Values of measurement channels set to Skip and computation channels set to Off are not output. • The data is appended to this file every time a report is created. YRECCRLF Report Data Model Language Code File Status Serial No.
Appendix 3 Text File Data Format rrr···r 1 Contents of the report file (13 characters) Hourly Daily Hourly+Daily Daily+Weekly Daily+Monthly 2 When the FX is set to Hourly+Daily and Combine, Hourly+Daily is output. When the FX is set to Hourly+Daily and Separate, the hourly report is output as Hourly, and the daily report as Daily.
Appendix 3 Text File Data Format File Output Example Below is an example of an hourly report of 4 channels while creating hourly and daily reports and saving each type of report to a separate file. YREC Report Data Model Language Code File Status Serial No. File Header Report Set File Data Math Set Start Time Ch Tag Unit Data Type Time Status Ave Max Min Sum App-8 Version 1.00.
Appendix 3 Text File Data Format Note • When the channel data is in the condition shown in the table below, the Er, Ov, or Bo status is output to a report. Data Condition Status Error Er Measurement channels Positive over range Negative over range Burn out detection Ov Ov Bo 2 3 Computation channels Ov Positive computation overflow (when the value exceeds 1.79E + 308) Negative computation overflow (when the value falls below –1.
Blank Page
Index Index Symbols **.............................................................................................. 9-7 [a?b:c].....................................................................................9-11 -Over...................................................................................... 1-14 +Over..................................................................................... 1-14 3 leg isolated RTD input.......................................................
Index display zone.......................................................................... 5-10 divided (report file)................................................................. 9-18 division (scale)....................................................................... 5-12 DST (daylight saving time)............................................ 1-50, 2-1 data files that the FX can create.......................................... App-3 E effects of operating conditions................................
Index message colors....................................................................... 5-8 message display............................................................ 4-6, 4-13 message display methods..................................................... 4-21 messages...................................................................... 1-12, 5-6 messages (errors, status, etc)............................................... 10-1 message summary......................................................
Index status relay............................................................................ 2-10 stopping the recording............................................................6-11 storage media, formatting...................................................... 6-16 structure of the file name......................................................... 6-5 sub menu....................................................................... 4-1, 5-28 sum scale.....................................................
