Manual
2-42
IM 04L21B01-64EN
Report
Click to display the channel selection screen.
Channel selection screen
Click the channel you wish to set up
Report setting
• Report kind
Select the type of report to be created.
Settings Description
OFF Do not create a report.
Hour Creates hourly reports.
Day Creates daily reports.
Hour+Day Creates hourly and daily reports.
Day+Week Creates daily and weekly reports.
Day+Month Creates daily and monthly reports.
• Day, Week day, and Time
Set the date or day of the week and the time when the report is to be created. The
specied date/time is when the report le is divided. Set the values in the range
indicated below. Items with a dash are invalid.
Report Type Day Week day Time
Hour - - 0 to 23
Day 1 to 28* - 0 to 23
Hour+Day - - 0 to 23
Day+Week - SUN to SAT 0 to 23
Day+Month 1 to 28* - 0 to 23
* You cannot specify 29, 30, or 31.
Report channel setting
• Use
Select [ON] for the report channels to be used.
• CH No.
Set the channel to assign to the report channel. All channels can be assigned, but
reports are not created for channels set to [Skip] or [OFF] even if they are assigned.
In the stacked bar graph display, report data is displayed in the following groups.
However, only channels that have the same unit as the rst group in the channel are
displayed.
No. 1 2 3 4
Report Groups R01 to R06 R07 to R12 R13 to R18 R19 to R24
2.6 Entering Basic Settings