Operation Manual

2-1

IM 1F5B2-01E

2. HANDLING PRECAUTIONS

All of the instruments in the UYF200 series of ultrasonic vortex flowmeters are thor-

oughly tested at the factory before shipment.

■ After you have received the ordered ULTRA YEWFLO flowmeter, visually check it

to ensure that the flowmeter is free from damage.

■ This chapter contains cautionary notes that must be observed when handling ULTRA

YEWFLO. Carefully read this chapter first.

■ For topics other than those found in this chapter, refer to the relevant heading of a

chapter, section or subsection.

■ If any questions arise, contact the vendor from whom you purchased ULTRA

YEWFLO or your nearest office of the Yokogawa service network.

2.1 Cross-check of the Model Code and Specifications

The model code and specifications are indicated on the data plate attached to the case of

ULTRA YEWFLO. Cross-check this information with that in the table in Section 9.2,

“Model and Suffix Codes,” to ensure that ULTRA YEWFLO is as specified in the order

instructions.

Figure 2.1 Example of Data Plate

2.2 Precautions Regarding Transportation

To protect against accidental damage to ULTRA YEWFLO while transporting it to a

new location, pack it in the original packing as when shipped from the Yokogawa

factory.