Operation Manual

7-1
IM 1F5B2-01E
7. WORKING WITH THE BT200 BRAIN TERMINAL
7. WORKING WITH THE BT200 BRAIN
TERMINAL
ULTRA YEWFLO is equipped with a communication function called “BRAIN.”
ULTRA YEWFLO thus communicates with a BT200 BRAIN Terminal, enabling you to
change the range or set the tag number from a remote location. This chapter explains
how to set or change parameters using a BT200 terminal. For more information on a
BT200 terminal, see the BT200 BRAIN Terminal instruction manual (IM 1C0A11-01E).
7.1 Connection of a BT200 Terminal and Notes on Use
7.1.1 Connection of a BT200 Terminal
■ A BT200 terminal can be linked with ULTRA YEWFLO through the transmission
line in different ways. Connect the terminal to the connecting hooks in a terminal
box or to the relay terminals on the transmission line, using BT200 communication
cable with IC clip, as shown in Figure 7.1-1.
■ You can also communicate with ULTRA YEWFLO via the amplifier board. To do
this, connect the BT200 terminal across the HHT and COM terminals.
ULTRA YEWFLO
(converter section)
Relay
terminals
Instrument room
Terminal board
Distributor
(power supply)
Figure 7.1-1 Connection of BT200