Operation Manual

4-12
IM 1F5B2-01E
4.3 Mounting remote type converter
For the remote type, using UYF021 signal cable to connect the converter and remote
type flowmeter.
The maximum signal cable length is 65ft (20m).
The converter is mounted on a 2-inch (60.5mm outer dia.) stanchion or horizontal pipe.
Figure 4.3 Mounting remote type converter
4.4 Repositioning the Indicator/Totalizer Component
• The indicator/totalizer component of ULTRA YEWFLO can be turned 90˚ either
clockwise or counterclockwise. For example, you can install ULTRA YEWFLO on a
vertical pipe, as shown in Figure 4.3, by removing the component and then reposition-
ing the joint pin (see Subsection 8.3.1).
Position at shipment
Position for vertical mounting
Figure 4.4 Repositioning of the Indicator/Totalizer Component
U-Bolt
(Only when specifying
it is attached)
Horizontal pipe mounting
2-inch ( 60.5mmouter dia.) pipe
Stanchion (vertical pipe)mounting
Mounting bracket
(Only when specifying
it is attached)
Nut
(Only when
specifying it is
attached)
IMPORTANT