User Manual

4-4
IM 04L61B01-01EN
4.2 Saving Display Templates
You can save display templates so that you can use them to display data files with the same
conditions on Universal Viewer.
4.2.1 Saving a Display Template
Create a display template that you can use later to show display data files and event data
files.
Procedure
1 Set the display conditions that you want to save as a template.
On the File menu, click Save Template.
A dialog box for saving the template appears.
2. Click Save.
You can also specify the save destination and file name.
A le with the .tdx extension will be saved.
Note
Display templates will not store file-specific information shown below.
• Cursor A and B data numbers
• Mark information
• Mark note information
4.2.2 Applying a Display Template
Specify a display template that you want to apply when showing display data files and event
data files.
Procedure
1 On the File menu, click Specify Template.
A dialog box for specifying the template appears.
2 Select the template you want to use, and click Open.
The template has been specied.
Note
Specifying the template only selects the template file.
If you want to use it at all times, perform the procedure in “Using a Display Template” (next section).