User guide

2-49
IM 04L51B01-17EN
Commands and Responses
1
2
App
ORTReset,2
OMTReset
Resets the Match Time Timer
Resets the match time timer
Syntax
OMTReset,p1
p1
Timer type
0
All timers
1 to 4 Timer number
Example Reset match time timer 2.
OMTReset,2
OCmdRelay
Outputs the DO Channel and Internal
Switch Status
Outputs the DO channel and internal switch status.
Syntax
OCmdRelay,p1
p1
Specification of a setting
• Express the setting. Set a channel status
as follows: [channel number]-[status]. Use
a hyphen as a separator.
• You can specify the following values for
the channel number.
DO channel number
Internal switch number
• You can specify the following values for the
status.
Off: Off status
On: On status
• You can specify the status of multiple
channels at once. To do so, use a semicolon
to separate channels as follows: [channel
number]-[status]:[channel number]-
[status]:. . . You can specify up to a total of
32 channels that consist of DO channels
and internal switches.
Example Set channels 0101, 0102, and 0103 to On and
internal switches S001 and S002 to Off.
OCmdRelay,0101-On:0102-On:0103-
On:S001-Off:S002-Off
Description
• If any of the channels that you specify do not exist or
are not set to manual output (SRangeDO command),
the settings of all channels are canceled, and a
command error results.
OBatName
Sets a Batch Name
Sets a batch name.
Syntax
OBatName,p1
p1
Always set this to 1.
p2
Batch number (up to 32 characters,
ASCII)
p3
Lot number (up to 8 digits, ASCII)
Query
OBatName?
Example Set the batch name structure to batch number
“PRESSLINE” and the lot number 007.
OBatName,1,’PRESSLINE’,007
Description
• For the characters that you can use in the specified
batch number (p2), see Appendix 1.
• The character limitations on the batch number (p2)
are the same as those for directory names. See the
explanation for the SDirectory command.
OBatComment
Sets a Batch Comment
Sets a batch comment.
Syntax
OBatComment,p1,p2,p3
p1
Always set this to 1.
p2
Comment number (1 to 3)
p3
Comment string (up to 50 characters,
UTF-8)
Query
OBatComment?
Example Set comment number 2 to “THIS PRODUCT IS
COMPLETED.”
OBatComment,1,2,‘THIS PRODUCT IS
COMPLETED’
OBatText
Sets a Batch Text
Sets a batch text.
Syntax
OBatText,p1,p2,p3,p4
p1
Always set this to 1.
p2
Field number (1 to 24)
p3
Field title (up to 20 characters, UTF-8)
P4
Field string (up to 30 characters, UTF-8)
Query
OBatText?
Example For field number 1, set the title to “Ope” and
the character string to “GX.”
OBatText,1,’Ope’,’GX’
ODispRate
Switches the Trend Interval
Switches between first trend interval (normal trend
interval) and second trend interval.
Syntax
ODispRate,p1
p1
Trend interval
NORMAL
First trend interval (normal trend
interval)
SECOND
Second trend interval
Example Switch from first trend interval to second trend
interval.
ODispRate,SECOND
Description
• Set the second trend interval with the STrdRate
command.
2.6 Operation Commands