User guide

2-37
IM 04L51B01-17EN
Commands and Responses
1
2
App
Description
• The settings specified with this command takes
effect with the OIPApply command. The GX/GP IP
address does not change until you send the OIPApply
command.
SFtpKind
File to Transfer via FTP
Sets the file to transfer via FTP.
Syntax
SFtpKind,p1,p2
p1
Setting type
Data
Automatically transfer
display and event data
fil es when fil es are
generated.
Report
Automatically transfer
report data files when
files are generated.
Snapshot
Automatically transfer
snapshot data files when
files are generated.
AlarmSummary
Transfer alarm
summaries
ManualSample
Automatically transfer
manual sampled data
f i l e s w h e n m a n u a l
sampling is executed.
p2
Enable or disable transfer (Off, On)
Query
SFtpKind[p1]?
Example Automatically transfer display and event data
files.
SFtpKind,Data,On
Description
• The report function is an option (/MT).
SFtpTime
FTP Transfer Time Shift
Sets the amount of time to shift file transfers that are
carried out by the FTP client function.
Syntax
SFtpTime,p1,p2
p1
Setting type
Data
Display and event data files
Report
Report files
p2
Transfer shift time [minutes] (0 to 120)
Query
SFtpTime[p1]?
Example Shift (delay) FTP transfers of report data files
by 30 minutes.
SFtpTime,Report,30
Description
• The report function is an option (/MT).
SFtpCnct
FTP Client Connection Destination
Server
Sets the FTP client connection destination server
Syntax
SFtpCnct,p1,p2,p3,p4,p5,p6,p7
p1
Server
Primary
Primary
Secondary
Secondary
p2
Server name (up to 64 characters, ASCII)
p3
Port number (1 to 65535)
P4
User name (up to 32 characters, ASCII)
p5
Password (up to 32 characters, ASCII)
p6
Directory name (up to 64 characters,
ASCII)
p7
PASV mode (Off, On)
Query
SFtpCnct[p1]?
The password is displayed using asterisks.
Example For the primary server, assign the name
“server1” and port number 21. Set the user
name to “Administrator1,” the password to
“password1,” and the directory to “directory1.”
Set PASV mode to Off.
SFtpCnct,Primary,’server1’,21,’Adm
inistrator1’,’password1’,’director
y1’,Off
SSmtpLogin
SMTP User Authentication
Sets the SMTP user authentication method.
Syntax
SSmtpLogin,p1
p1
User authentication type
Off
Not use authentication.
Auth-Smtp
Use Authentication SMTP.
POP3
Use POP Before SMTP
(unencrypted).
APOP
Use POP Before SMTP
(encrypted).
Query
SSmtpLogin?
Example Do not use authentication.
SSmtpLogin,Off
SSmtpCnct
SMTP Client Connection Destination
Server
Sets the SMTP client connection destination server
Syntax
SSmtpCnct,p1,p2,p3,p4,p5
p1
Destination server type (SMTP, POP)
p2
Server name (up to 64 characters, ASCII)
p3
Port number (1 to 65535)
P4
User name (up to 32 characters, ASCII)
p5
Password (up to 32 characters, ASCII)
Query
SSmtpCnct[p1]?
The password is displayed using asterisks.
Example Connect to SMTP server “SMTPserver1.”
Set the port number to 25, the user name
to “administrator1,” and the password to
“password1.”
SSmtpLogin,SMTP,’SMTPserver1’,25,’
administrator1’,’password1’
SMailHead
2.4 Setting Commands