Manual

1-11

IM 04L51B01-01EN

Configuring the GX/GP

App

1.2 Configuring AI Channels (Analog input

(including DI) channels)

Set the AI channels’ input range, alarm, display, and calibration correction.

Set the necessary setup items in order from the top.

1.2.1 Setting the Range

Path

GX/GP: MENU key > Browse tab > Setting > Setting menu AI channel settings > Range

Web browser: Config. tab > AI channel settings > Channel range (display example: 0001-

0010)

Hardware configurator: AI channel settings > Channel range (display example: 0001-0010)

Description

Setup Item Selectable Range or Options Default Value

First-CH AI channel —

Last-CH AI channel —

First-CH, Last-CH

Set the target channels. The channels that you can specify appear depending on the module

configuration.

Range

Setup Item Selectable Range or Options Default Value

Type Skip, Volt, GS, TC, RTD

, DI Volt

Range See “Range Details.” See “Range Details.”

Span Lower Numeric value (depends on the range) –2.0000

Span Upper Numeric value (depends on the range) 2.0000

Calculation Off, Delta, Linear scaling, Square root Off

Reference channel

Number (I/O channel number) —

1 Cannot be specified for the electromagnetic relay scanner type (Type suffix code: -T1) analog

input module.

2 Appears when Calculation is set to Delta.

Type

Set the input signal type.

Options Description

Skip Not measured.

Volt, GS, TC, RTD, DI Input type. Represents DC voltage, GS (0.4-2V, 1-5V inputs), thermocouple,

RTD, and ON/OFF input, respectively.

Note

If you are not using an electromagnetic relay scanner type module, set the range type of each

channel to Skip.