Manual

1-8
IM 04L51B01-01EN
Configuring the SMTP Client Function (E-mail transmission)
Item Reference
Setting the user authentication method
→page 1-127Setting the SMTP server
Setting the POP3 server
Setting the e-mail transmission conditions (recipients, subject, header, cause, etc.) →page 1-128
Configuring the SNTP Client Function (Time synchronization via
communication)
Item Reference
Configuring the SNTP server
→page 1-130
Setting the query operation (interval, timeout, time adjust on start action)
Configuring the Modbus Client Function (External device connection via
Modbus protocol; /MC option)
Item Reference
Enabling the Modbus client function and configuring basic settings (communication
interval, recovery action, keep connection)
→page 1-132
Configuring the destination server
Setting the commands to transmit (type, data type, register, etc.)
Limiting the Connection to the Modbus Server (GX/GP)
Item Reference
Limiting the connection to the Modbus server (GX/GP) →page 1-136
Configuring the Operation of the Server Functions
Item Reference
Setting the operation of the server functions (keep alive, timeout, FTP server output
directory format, Modbus server delay response)
→page 1-135
Setting the Server Functions to Use
Item Reference
Setting the server functions to use (FTP, HTTP, SNTP, MODBUS, GENE) →page 1-136
Configuring the Serial Communication Function (/C2 and /C3 options) (Setting
menu: Communication (serial) settings)
Configuring Basic Settings
Item Reference
Configuring the serial communication function (normal, Modbus master, Modbus
slave)
→page 1-138
Setting communication conditions (baud rate, parity, handshake, etc.)
Configuring the Modbus Master Function
Item Reference
Configuring the Modbus master function (communication interval, communication
timeout, gap between messages, recovery action)
→page 1-139
Setting the Modbus master transmission commands (type, data type, register, etc.) →page 1-140
Setting Communication Channels (/MC option) (Setting menu: Communication
channel settings)
Item Reference
Setting communication channels (decimal place, span (upper, lower), unit)
→page 1-116
Replacing values with preset values when communication data is not updated for a
specified time period (watchdog timer function)
Setting Alarms
Item Reference
Setting alarms (type, value, hysteresis, logging, output, alarm delay) →page 1-118
What Do You Want to Configure?