Manual

2-17
IM 04L61B01-02EN
Creating Setup Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Editing Using Tool Buttons
On table type configuration windows, you can use the tool buttons that are shown at the
bottom of each table. Each tool button is assigned a function. You can use them to edit items
collectively.
The available types of tool buttons are Initialize, Paste to all lines, Increment, Minimize/
Maximize, and Change all.
Tool button types and functions: See the table on the next page.
In the operation example below, the Paste to all tool button is used to set the Type of all
selected channels to the same value.
Procedure
1 On the table type configuration window (the AI channel settings configuration window
in this example), select the lines that contain the data that you want to copy.
CH0001 is selected.
Select the line
to copy from.
Data to copy
Paste destination
2 Drag the cursor to the last line that you want to assign the same type.
CH0001 to CH0004 are selected.
Drag until the last line you want to paste the same data to.
3 Click the Past to all button on the tool bar.
Click the Paste to all tool button.
The type of CH0002 to CH0004 is set to Volt.
Note
• When you use the tool button to paste data, the values are automatically corrected in the same
way as when you enter values directly.
• Tool buttons are unavailable when no cells are selected (except for the Change all button).
2.3 Editing Setup Data