User Manual

- 98/131 -

IM MW100-S16E-1

Ed01

2.5.11. DNP slave/server object table setting (WV)

This command is used to configure object table of DNP slave/server. For

implementing DNP communication functions, this command is added.

WV p1, p2, p3, p4, p5

p1 : Object type (IO_B, IO_A, MATH_B, MATH_A,

COM_B, COM_A)

IO_BI : Binary Input object for I/O channels

IO_AI : Analog Input object for I/O channels

IO_BO : Binary Output object for I/O channels

IO_AO : Analog Output object for I/O channels

MATH_BI : Binary Input object for Math channels

MATH_AI : Analog Input object for Math channels

COM_BO : Binary Output object for Comm. channels

COM_AO : Analog Output object for Comm. channels

p2 : Top channel number to map (001 to 060,

A001 to A300, C001 to C300)

001 to 060 : in case p1 is IO_xx

A001 to A300 : in case p1 is MATH_xx

C001 to C300 : in case p1 is COM_xx

p3 : Mapping data count (0 to 60, 0 to 300)

0 to 60 : in case p2 is 001 to 060

0 to 300 : in case p2 is A001 to A300 or C001 to C300

p4 : Event class (NONE, 1 to 3)

NONE : does not generate event

1 to 3 : assign Class 1 to 3

Unless DNP option is specified, command can't be used.