User Manual

- 92/131 -
IM MW100-S16E-1
Ed01
2.5.5. DNP master destination setting (WN)
This command is used to configure destination of DNP master. For implementing
DNP communication functions, this command is added.
- Setting
WN p1, p2 (in case p2 is 65520)
17 18
WN p1, p2, p3, p4, p5 (in case p2 is not 65520)
p1 : Destination number (01 to 10)
p2 : DNP address of DNP slave (0 to 65520)
p3 : Publishing command for integrity poll (0 to 15)
0 : None (do nothing)
1 : Read Class 0
15 : Read Class 0, 1, 2, 3
p4 : Publishing command for event poll (0 to 15)
0 : None (do nothing)
14 : Read Class 1, 2, 3
15 : Read Class 0, 1, 2, 3
p5 : Requesting unsolicited message (OFF, ON)
OFF : Not request
ON : Request
- Query
WN [p1] ?
17
Unless MATH and DNP option is specified, command can't be used.
18
When 65520 is set to p2, entry is disabled.