User Manual

- 90/131 -
IM MW100-S16E-1
Ed01
2.5.3. Enabling client function (WC)
This command is used to enable master/client functions, to implement DNP
communication functions, new switch named DNP3_M and DNP3_C are added to p1
parameter for enabling DNP master/slave functions.
- Setting
WC p1, p2
p1 : Kind of master/client (DHCP, FTP, SMTP, SNTP,
MODBUS_M, MODBUS_C, DNP3_M, DNP3_C)
15
DHCP : DHCP client
FTP : FTP client
SMTP : SMTP client
SNTP : SNTP client
MODBUS_M : Modbus master
MODBUS_C : Modbus client
DNP3_M : DNP3 master
DNP3_C : DNP3 client
p2 : Enabling switch (OFF, ON)
OFF : Disable function
ON : Enable function
- Query
WC [ p1 ] ?
15
Unless MATH and DNP option is specified, DNP3_M, DNP3_C can't be selected.