User Manual

- 13/131 -
IM MW100-S16E-1
Ed01
2.2.2. Enabling DNP master/client functions
To use DNP master/client functions of MW100, user should enable these functions at
first. Required steps to enable DNP master/client functions are shown in Figure 4 and
Figure 5. About the detail of the configuration, refer the explanation of Table 6 and
Table 7.
Figure 4. Required steps to enable DNP master function
[step 3] enable the master function
[step 1] select the function (driver)
[step 2] configure the master DNP address
Screen of serial communication setting
Screen of DNP 3.0 master setting 1