User Manual

- 106/131 -
IM MW100-S16E-1
Ed01
2.6.1. Log and summary output (FL)
This command is used to output log or summary. To implement DNP communication
functions, new parameter named DNP3_M, DNP3_C, DNP3_S, DNP3_T and
DNP3_MC, DNP3_MS, DNP3_CC, DNP3_CS are added.
- Setting to output log
FL p1, p2, p3 (in case p1 is 0)
p1 : Output type (0)
0 : Output log
p2 : Data kind (ERROR, RECORD, ALARM, MESSAGE,
COM, FTPC, MAIL, DHCP, SNTP, FTPS,
HTTP, MODBUS_M, MODBUS_C,
MODBUS_S, MODBUS_T,
MATH, CMD, RECSTATUS,
DNP3_M, DNP3_C, DNP3_S, DNP3_T)
ERROR : Operation error log
RECORD : Recording log
ALARM : Alarm summary
MESSAGE : Message summary
COM : Communication log
FTP_C : FTP client log
SMTP : SMTP client log
DHCP : DHCP client log
SNTP : SNTP client log
FTP_S : FTP server log
HTTP : HTTP server log
MODBUS_M : Modbus master log
MODBUS_C : Modbus client log