User Manual

- 100/131 -
IM MW100-S16E-1
Ed01
2.5.12. DNP slave destination setting (VV)
This command is used to configure destination of DNP slave. For implementing DNP
communication functions, this command is added.
- Setting
VV p1, p2
28 29
p1 : Destination number (01 to 10)
p2 : DNP address of DNP master (0 to 65520)
- Query
VV [p1] ?
28
Unless DNP option is specified, command can't be used.
29
When 65520 is set to p2, entry is disabled.