Owner's manual

2-43

IM MW100-17E

Response

AppApp

Index

Data Block Member Values

Member Name Value

Year 00 to 99 (70 to 99: 1970 to 1999, 00 to 69: 2000 to 2069)

Month 1 to 12

Day 1 to 31

Hours 0 to 23

Minute 0 to 59

Second 0 to 59

Milliseconds 0 to 990

Computation start 0, 1

Message information Bits 0:0, 1

Bits 1:0, 1

•

Setting key 0x0000 to 0xffff

Channel number 1 to 60: Measurement Channel

101 to 400: MATH channels

Alarm Status 0: No specification

1: Upper limit alarm setting

2: Lower limit alarm setting

3: Differential upper limit alarm setting

4: Differential lower limit alarm setting

5: Upper limit on rate-of-change alarm setting

6: Lower limit on rate-of-change alarm setting

7: Delay upper limit alarm setting

8: Delay lower limit alarm setting

Data value –32767 to 65535

–9999999 to 99999999

Unused Undefined

Special Data Values

During special statuses, measured and computed values are as shown in the table

below.

Special Data Value Type Value

+OVER 0x7fff 0x7fff

–OVER 0x8001 0x8001

Error 0x8004 0x8004

Note

• Added information and alarm statuses are output without regard to the byte order specified

in the BO command.

• Messages inside added information is uncertain.

2.3 Binary Output