Owner's manual

2-36
IM MW100-17E
Output of Strain Input Initial Balancing Result (FL1, BALANCE)
Output using the FL1 command.
Syntax
EACRLF
s_cccc_uuCRLF
.................
ENCRLF
s Status (A, F, S)
A: Executing initial balancing
F: Exit initial balancing
S: Skip
cccc Channel number (001-060)
uu Initial balancing result (OK, NG)
OK: Reset or initial balance successful
NG: Reset or initial balance failed
_ Blank
Example
EA
F 001 OK
F 002 OK
S 003
EN
Output of Status Information (IS)
• Output using the IS command.
• Outputs the operational status of the instrument.
• For details on the status information, see appendix 4, “Bit Structure of Status
Information.”
Syntax
EACRLF
aaa.bbb.ccc.eee.fff.ggg.hhhCRLF
ENCRLF
aaa
Status information (000 to 255)
bbb
Status information 1 (000 to 255)
ccc
Status information 3 (000 to 255)
ddd
Status information 4 (000 to 255)
eee
Status information 5 (000 to 255)
fff
Status information 6 (000 to 255)
ggg
Status information 7 (000 to 255)
hhh
Status information 8 (000 to 255)
Example
EA
000.000.002.000.000.000.000.000
EN
2.2 ASCII Output