Owner's manual

2-20
IM MW100-17E
Mail Client Error Messages (cont.)
Error Code Description Corrective Action
EHELO
HELO command com failed Check whether SMTP server is
functioning correctly.
EMAILFROM
MAILFROM command com Check whether SMTP
server is
failed correctly
.
ERCPTTO
RCPTTO command com failed Check whether SMTP server is
functioning correctly.
EDATA
Data communication failed Check whether SMTP
server is
functioning correctly.
ETCPIP
Internal processing error Servicing required.
EINVAL
Internal processing error
Servicing required.
EPOP3HOSTNAME
SMTP server name not correct Check whether destination server name
is set correctly.
EPOP3UNREACH
POP3 server not found Ch
eck whether destination POP3 server
is running.
EPOP3TIMEOUT
Communication with the POP3 Check cable connections and power of
server timed out. HUB.
EPOP3AUTH
Authorization on POP3 server
Check whether user name and server
failed name are allowed on server.
ESMTOAUTH
SMTP Authentication failed Check whether user name and server
name are allowed on server.
EANOTSUPPORT
Attempted to connect to a server Please change servers.
requesting an encoding algorithm
that is not supported by the MW100
Output of DHCP Client Logs (FL0, DHCP)
• Output using the FL command.
• DHCP information logs are output. Up to 50 past logs are retained. If that number is
exceeded, old logs are overwritten with new ones.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_kkk...k_mmm...mCRLF
.........................................
ENCRLF
yy
Year (00 to 99)
mo
Month (01 to 12)
dd
Day (01 to 31)
hh
Hour (00 to 23)
mm
Minute (00 to 59)
ss
Seconds (00 to 59)
kkk...k
Message type (15 characters)
mmm...m
Message
_
Blank
Example
EA
99/05/11 12:20:30 link on
99/05/11 12:20:31 apply 192.168.1.1
EN
2.2 ASCII Output