Owner's manual

2-19
IM MW100-17E
Response
1
2
3
AppApp
Index
Output of Mail Client Logs (FL0, SMTP)
• Output using the FL command.
• Mail client logs are output. Up to 50 past logs are retained. If that number is exceeded,
old logs are overwritten with new ones.
Syntax
EACRLF
yy/mo/dd_hh:mm:ss_ffffff_n_uuu...u_mmm...mCRLF
.........................................
ENCRLF
yy
Year (00 to 99)
mo
Month (01 to 12)
dd
Day (01 to 31)
hh
Hour (00 to 23)
mm
Minute (00 to 59)
ss
Seconds (00 to 59)
ffffff
Cause
ALARM:
Alarm mail
TIME:
Time mail
POWER:
Power failure recovery mail
SYSTEM:
Setting error mail
FILE:
File creation mail
MEDIA:
Media free space
TEST:
Test mail
REPORT:
Report mail
n
Recipient list
1
: Recipient 1 only
2
: Recipient 2 only
+
: Both recipients 1 and 2
uuu...u
Recipient mail address (delimited with blanks, 30 characters)
(Domain name not output.)
mmm...m
Error message (only upon errors)
_
Blank
Example
EA
01/05/11 12:20:30 ALARM 1 tom
01/05/11 12:20:31 TIME 2 joe ken EHOSTNAME
EN
Mail Client Error Messages
Error Code Description Corrective Action
EHOSTNAME
SMTP server name not correct Check whether destination server name
is set correctly.
ETIMEOUT
Communication with the SMTP power Check cable connections and of HUB.
server timed out.
ELINK
Ethernet not powered
Check cable connections and power of
HUB.
EUNREACH
SMTP server not found
Check whether destination SMTP server
address is set correctly.Check whether
the server is running.
2.2 ASCII Output