Owner's manual

2-3

IM MW100-17E

Response

AppApp

Index

2.1 Response Format

Data Sum

Sum value of binary data.

• Sum value is calculated only when “calculate sum” is set in the CS command. The value “0”

is stored in the sum value domain when “do not calculate sum” is set.

Flag

Flag value

Bits Notation 0 1 Flag Meaning

7 BO MSB LSB Byte order

6 CS None Y Checksum

5 - - -

4 - - -

3 - - -

2 - - -

1 - - -

0 - - -

• The byte order is the data order of 2 or more bytes including the binary data portion. It

indicates that data is stored in the MSB (top byte) first or LSB (bottom byte) first.

• Checksum indicates whether a sum value is in the header sum and data sum domains, and

if the checksum value (CS) is 0, then 0 is stored in those domains.

• If a dash ( - ) is located in the notation or flag column, the bit is not use

d. The value is

indefinite.

Identifier

Identifier Binary Data Type Format

0 Unspecified data File

128 Unspecified data Data

129 FIFO data Data

130 The latest measured/computed data Data

131 Latest output data Data

132 FIFO read range Data