Owner's manual

1-42
IM MW100-17E
1.8 Output Commands
Example Output the decimal place and units of the channels 1 to
5.
FE1,001,005
Explanation Set a first and last channel number so that the first is
less than or equal to the last.
FF Output of Measured/Computed
FIFO Data
Setting When p1=0
FFp1,p2,p3,p4,p5,p6,p7<terminator>
When p1=1
FFp1,p2<terminator>
p1
Output type
0 Outputs the FIFO data
1 Outputs the FIFO read range
p2 Measurement groups
1 Data from measurement groups 1
2 Data from measurement groups 2
3 Data from measurement groups 3
p3 First channel (001 to 060 and A001 to
A300)
p4 Last channel (001 to 060 and A001 to
A300)
p5 Read out start position
(-1, 1 to 99999999999)
-1 Latest read position
p6
Read out end position
(-1, 1 to 99999999999)
-1 Latest read position
p7
Max. number of read blocks (1 to
9999)
Example Output the FIFO read range for measurement group 1.
FF1,1
Explanation •
The oldest FIFO buffer data is overwritten with the
newest data in a cyclical manner
.
• The output value of p1=1 (output FIFO read range)
is the allowable read range for p1=0 (FIFO data
output).
• Set a first and last channel number so that the first is
less than or equal to the last.
FL Output of Logs, Alarm
Summaries, and Status
Setting When p1=0
FLp1,p2,p3<terminator>
When p1=1
FLp1,p2,p3,p4<terminator>
When Outputting Logs
Setting
FLp1,p2,p3<terminator>
p1 Output type (0)
0 Log output
p2 Data type
ERROR Operation error log
RECORD Recording log
ALARM Alarm summary
MESSAGE Message summary
COM General purpose
communication log
FTP_C FTP client log
SMTP Mail client log
DHCP DHCP client log
SNTP Time synchronization
client log
FTP_S
FTP server log
HTTP HTTP server log
MODBUS_M Modbus master log
MODBUS_C Modbus client log
MODBUS_S Modbus slave log
MODBUS_T Modbus server log
CIP CIP server log
PCCC PCCC slave log
*
MATH Computation status
*
CMD Operation log
RECSTATUS Recording status
* Firmware version R3.02 or later
p3 Max. number of read blocks
ERROR 1 to 50
RECORD 1 to 250 (Or "1024" on
models with firmware version R3.02 or
earlier)
ALARM 1 to 256
MESSAGE 1 to 50
COM 1 to 200
FTP_C 1 to 50
SMTP 1 to 50
DHCP 1 to 50
SNTP 1 to 50
FTP_S 1 to 50
HTTP 1 to 50
MODBUS_M 1 to 50
MODBUS_C 1 to 50
MODBUS_S 1 to 50
MODBUS_T 1 to 50
CIP 1 to 50
*
PCCC 1 to 50
*
MATH 1
CMD 1 to 256
RECSTATUS 1
* Firmware version R3.02 or later
Example
Output 10 blocs of the operation error log.
FL0,ERROR,10
Explanation Outputs the log (records) saved to the instrument.
When Outputting Status
Setting
FLp1,p2,p3,p4<terminator>
p1 Output type (1)
1 Outputs status