Owner's manual

1-34
IM MW100-17E
YU Mail Contents Settings
Setting When p1=TIME
YUp1,p2,p3,p4,p5<terminator>
When p1=ALARM
YUp1,p2,p3<terminator>
When p1 is neither TIME, ALARM, nor REPORT
YUp1,p2<terminator>
For other than report notification
Setting
YUp1,p2,p3,p4,p5<terminator>
p1 Send contents
ALARM Alarm notification
FILE File creation notification
MEDIA Media free space
notification
POWER
Startup notification
SYSTEM Setting error notification
TIME Periodic report
p2 Recipient
OFF Do not send
1 Send to recipient address 1
2 Send to recipient address 2
1_2 Send to recipient addresses
1 and 2
p3 Add instantaneous value data ON/OFF
p4
Send interval (1/2/3/4/6/8/12/24)[hours]
p5 Reference time (HH:MM)
HH hours (00 to 23)
MM Minute (00 to 59)
Query
YU?
Example Set mail to recipients 1 and 2 daily at 18:00 with an
instantaneous value data attachment.
YUTIME,1_2,ON,24,18:00
For report notification
Setting
YUp1,p2,p3,p4,p5,p6,p7,p8,p9,p10,p11
<terminator>
p1 Sent contents
REPORT
Notification of report
results
p2 Recipient
OFF
Do not send
1 Send to recipient address 1
2 Send to recipient address 2
1_2 Send to recipient addresses
1 and 2
p3 Send when creating hourly report
(OFF/ON)
p4 Send when creating daily report
(OFF/ON)
p5
Send when creating weekly report
(OFF/ON)
p6
Send when creating monthly report
(OFF/ON)
p7 Add maximum value data (OFF/ON)
p8 Add minimum value data (OFF/ON)
p9 Add average value data (OFF/ON)
p10 Add integral value data (OFF/ON)
p11 Add instantaneous value data (OFF/ON)
Query
YU?
Example Add maximum and integral values when daily report is
created and send to recipient 1
YUREPORT,1,OFF,ON,OFF,OFF,ON,OFF,OFF,ON,
OFF
Explanation You cannot enter REPORT
settings on products without
the /M3 report function option.
YC E-Mail Alarm Transmission
Settings
Setting
YCp1<terminator>
p1 Channel structure (up to 100
characters)
Query
YC?
Example Set the channels for mail alarm transmission judgement
to A001 to A005.
YCA001-A005
Explanation
• See section 1.3 for the channel structure.
• Y
ou can specify measurement and MATH channels
(only with the /M1 MATH function option and when
the pulse input module is installed).
YT Time Synchronization Settings
Setting
YTp1,p2,p3,p4<terminator>
p1 SNTP server name (up to 64
characters)
p2 Port number (1 to 65535)
p3
Reference time (HH:MM)
HH hours (00 to 23)
MM Minute (00 to 59)
p4 Query interval (3H/12H/24H) [hours]
Query
YT?
Example Set time synchronization for once daily at 5:00.
YTsntp_server.abc.com,123,05:00,24H
1.6 Setting Commands (Communication Related)