Owner's manual

1-31
IM MW100-17E
Commands
1
2
3
AppApp
Index
SX Display Group Settings
Setting
SXp1,p2,p3<terminator>
p1 Display group number (01 to 18)
p2 Display group name (up to 16
characters)
p3 Channel structure (up to 100
characters, up to 20 channels)
Query
SX[p1]?
Example
Channel 1 and channels 3 to 6 are given a group name
of GROUP1 and set to group 1.
SX1,GROUP1,001.003-006
Set the channel structure by delimiting individual
channels with a period ( . ), and specifying ranges of
channels with a hyphen ( - ).
Explanation • For the characters that can be used for group
names, see user specified characters in section 1.3.
• See section 1.3 for the channel structure.
TL Trip Line Settings
Setting When p3=OFF
TLp1,p2,p3<terminator>
When p3=ON
TLp1,p2,p3,p4,p5<terminator>
p1
Display group number (01 to 18)
p2
Trip line number (1 to 4)
p3 Trip line display ON/OFF
p4 Display color (rrr.ggg.bbb)
rrr RGB R value (0 to 255)
ggg RGB G value (0 to 255)
bbb RGB B value (0 to 255)
p5 Display position (0 to 100)[%]
Query
TL[p1[,p2]]?
Example Display trip line 1 in group one in red at 10% position.
Set the top of the graph to 100% and the bottom to 0%.
TL1,1,ON,255.0.0,10
XR Channel and Tag Display
Switching
Setting
XRp1<terminator>
p1 Display type
CHANNEL Channel number display
TAG Tag display
Query
XR?
Example Set tag display.
XRTAG
1.5 Setting Commands (Display Related)
SG Message Settings
Setting
SGp1,p2<terminator>
p1 Message number (0 to 5)
p2 Message string (up to 15 characters)
Query
SG[p1]?
Example Set the MESSAGE1 string to message number 1.
SG1,MESSAGE1
Explanation • For the characters that can be used for messages,
see user specified characters in section 1.3.
• The message number 0 setting is valid in Setting
mode and Measurement mode.