Owner's manual

1-5
IM MW100-17E
Commands
1
2
3
AppApp
Index
Control Commands (Cont.)
Command Functions Operation Administrator User Page
Name Mode
SD
Date and Time Settings
Setting Yes No 1-39
RC
Initialization of Settings Setting Y
es No 1-40
RS
Reconfiguration Setting Y
es No 1-40
MF
Media Preparations Setting Y
es No 1-40
BL
Execution of Strain Input Initial Balancing Setting Y
es No 1-40
PV
Transmission Output Control Measurement
Yes No 1-40
SP
User Output Settings Measurement Y
es No 1-40
EC
Execution of Communication Setting Y
es No 1-40
TC
Communication Test
All mode Yes No 1-40
CC
Communication Open/Close All mode Y
es Yes 1-40
BO
Byte Output Order Settings All mode Y
es Yes 1-40
CS
Checksum Settings All mode Y
es Yes 1-41
GR
Resetting of the MATH Channels Specified by the MATH Group Measurement Yes No 1-41
Yes: Permitted to use command, No: Not permitted to use command
Output Commands
Command Functions Operation Administrator User Page
Name Mode
FD
Output of Latest Measured/Computed Data All mode Y
es Yes 1-41
FO
Output of Latest Output Data All mode Y
es Yes 1-41
FE
Output of Decimal Place, Units, and Setting Data All mode Y
es Yes 1-41
FF
Output of Measured/Computed FIFO Data All mode Y
es Yes 1-42
FL
Output of Logs, Alarm Summaries, and Status All mode
Yes Yes 1-42
IS
Output of Status Information All mode Y
es Yes 1-43
VF
Output of Relay Status All mode Y
es Yes 1-43
CF
Output of System Recognition Status All mode Y
es Yes 1-43
ME
Output of Media Information All mode Y
es Yes 1-43
Yes: Permitted to use command, No: Not permitted to use command
Output Commands (RS-422A/485 Specific Commands)
Command Functions Operation Administrator User Page
Name Mode
Esc O
Instrument Open All mode Y
es Yes 2-4
Esc C
Instrument Close All mode Y
es Yes 2-4
Yes: Permitted to use command, No: Not permitted to use command
List of Commands Valid When Option Functions Are Installed
Option Command Name
/C2 or /C3
YS
/M1
SO/SK/MG/VL/VM/XG/EX/WD/WE/WF/SV/GR
/C2 and /M1 or /C3 and /M1
WA/WB
/M3
RO/RM
1.2 List of Commands