Owner's manual

App-6

IM MW100-17E

Note

• For INT32 or INT16, only the mantissa of the measured/computed data is acquired. The

decimal place must be obtained separately.

•

For FLOA

, the measured/computed data including the decimal place

can be acquired.

• The FLOAT and INT32 data domains are set so that they can only be accessed (read/write)

by the unit of two registers.

•

Alarm statuses are output in the same format as those described in se

ction 2.3, “Binary

Output.”

Hold Registers

41001 to 41600, and 42001 to 42300 are for functions of firmware version R3.04 or later.

Absolute Relative Allocation Data

Address Address Type

40001 0000 Lower byte of data from communication input channel C001 FLOAT

40002 0001 Upper byte of data from communication input channel C001

: : : :

40599 0598 Lower byte of data from communication input channel C300 FLOAT

40600 0599 Upper byte of data from communication input channel C300

41001 1000 Lower byte of data from communication input channel C001 INT32

41002 1001 Upper byte of data from communication input channel C001

: : : :

41599 1598 Lower byte of data from communication input channel C300 INT32

41600 1599 Upper byte of data from communication input channel C300

42001 2000 Data from communication input channel C001 INT16

: : : :

42300 2299 Data from communication input channel C300 INT16

Appendix 2 Modbus Protocol