Manual

2
IM 772090-01E
Features of the Compact Flash Card
CompactFlash Specification Compliance
• Runs on a single 3.3 V/5 V power supply
• 50-pin, 2-piece connector, Type I (3.3 mm thick)
• 256 byte attribute memory
Interface
• PC card memory mode
• PC card I/O mode
• True IDE mode
Performance
• Burst data transfer rate (Drive-Host): max 66.6 mB/sec (Theoretically)
• Sustained write: max 18 MB/sec (512MB, 1GB), 42MB/sec (2GB)
• Sustained read: max 22 MB/sec (512MB, 1GB), 42MB/sec (2GB)
No. of write/delete operations: 100000
Adapter Features
By inserting the compact flash card as in the figure below, the compact flash card can be
used as a Type II PC card. Make sure the card is oriented properly when inserting it into
the adapter.
Adapter(772090)
CompactFlash
Compact Flash Specifications
Dimensions of card:
42.8
3.85
3.3
36.4
To Adapter
Unit: mm
Operating voltage: 3.3 V ± 5%
5.0 V ± 10%
Current consumption:
• 5 V during operation (at the Ultra DMA mode 4)
operation 512MB 1GB 2GB Unit
Read 68.8 68.4 100.6 mA (Typ.)
Write 67.2 66.6 86.2 mA (Typ.)
Idle 8.6 8.7 8.9 mA (Typ.)
• 3.3 V during operation (The table below is a value at Ultra DMA mode 4.)
operation 512MB 1GB 2GB Unit
Read 52.6 52.6 78.9 mA (Typ.)
Write 56.9 57.1 76.2 mA (Typ.)
Idle 1.4 1.4 1.4 mA (Typ.)
Operating Environment
• Operating temperature:
- 40°C to 85°C
• Operating humidity:
85% or less (no condensation)
• Storage temperature:
- 45°C to 90°C
• Storage humidity:
95% or less (no condensation)