Instruction Manual

1-25
IM MW100-01E
Explanation of Functions
1
2
3
4
5
App
Index
Saving Data to the CF Card
Save Location
Measured data, computed data, thinned data, recording logs, alarm summaries, manual
sample data, report data, and settings can be saved on the CF card.
• Folder Structure
The structure of the data save folder is as shown below.
Settings folder
Save folders for measured, computed, and thinned data
Manual sample folder
Report folder
* When the data save folder is set to Auto
• Folder Name Settings
Select one of the following methods for creating folders for saving measured,
computed, and thinned data. Other folder names are fixed.
Type Folder Name Description
Auto DATAnnnn DATA: Fixed
nnnn: Serial number (0000 to 9999)
Partial xxxxnnnn xxxx: Any 1 to 4 alphanumeric characters
nnnn: Serial number (0000 to 9999), can specify any start number.
Free xxxxxxxx xxxxxxxx: Any 1 to 8 alphanumeric characters
Date mddhhmmn mddhhmm:
Month, day, hour, minute
(m: 1 to 9, X (October),
Y (November), Z (December)
dd: 01 to 31, hh: 00 to 23
mm: 00 to 59)
n: serial number (0 to 9, A to Z)
• File Name
This is a list of file names generated by the MW100. A file name other than that of the
setting file cannot be specified.
Type File Name Save
Location
Description
Settings xxxxxxxx.PNL CONFIG xxxxxxxx: Specified when saving
(8 characters or fewer)
Measure-
ment
Measurement
group 1
mdd1nnnn.MXD
DATAnnnn
*1
mdd
*2
: Month/day (m: 1 to 9,
X (October), Y (November),
Z (December), dd: 01 to 31)
1 to 3: Measurement groups 1 to 3
M: MATH
T: Thinning
nnnn: Serial number (0000 to 9999)
Measurement
group 2
mdd2nnnn.MXD
Measurement
group 3
mdd3nnnn.MXD
Computation mddMnnnn.MXD
Thinning mddTnnnn.MXD
Recording log RECORDLG.TXT DATAnnnn
*1
Alarm summary ALARMLG.TXT DATAnnnn
*1
Manual sample mddSnnnn.DAM MANUAL mdd
*2
: Month/day (m: 1 to 9,
X (October), Y (November),
Z (December), dd: 01 to 31)
S: Manual sample
nnnn: Serial number (0000 to 9999)
Report Daily Dyymmddn.DAR REPORT D: Daily
W: Weekly
M: Monthly
yymmdd
*2
: Year/month/day (yy: last
two digits of Western
calendar, mm: 01 to 12,
dd: 01 to 31)
n: serial number (0–9, A to Z)
Weekly Wyymmddn.DAR
Monthly Myymmddn.DAR
*1. Created in the DATA folder. When the data save folder is set to Auto.
*2. Date the file is created.
1.3 Functions of the Main Module