Instruction Manual

5-15
IM MW100-01E
Specification
1
2
3
4
5
App
Index
Report Recording Function (/M3 Option)
Record start/stop operation: Executed simultaneously upon recording start/stop of
measured and computed values. No trigger function available.
Report data: Creates daily, weekly, and monthly data.
The creation time for
daily, weekly, and monthly reports is the same as the daily report
le creation time.
Report recording channels:
Can be specied for each channel (up to 60 channels).
Data format: Tab delimited text
File name: Automatically generated using the date and serial number (the
date is the le create date)
jyymmddn.DAR
j:
D (daily), W (weekly), M (monthly)
yy: Y
ear when le created (local time), last 2 digits of Western
calendar
mm: Month when le created (local time), 01 to 12
dd: Date when le created (local time), 01 to 31
n: Serial number (0 to 9,
A to Z)
DAR: Report le extension (uppercase)
Maximum le size: Approximately 135 KB/le (max)
Saving Settings
Saves settings to CF card.
Saving/loading: Set by user function key on the main unit, browser, or by
communication command. From the user function key, only the
SETTING.PNL le can be saved and loaded.
Settings that can be saved:
All settings are saved
Saved items:
Channel: Input range, output range, expression, calculation
constant, MA
TH group, alarm, delay alarm, rolling
average, lter and TC, strain input, relay, program
channels, measurement operation, computation
operation, output operation, and tag settings.
Recording:
Recording channel, recording operation, thinning
recording operation, save option, le message, and
data save folder settings
Communication: User, serial communication, IP address*, server
,
Modbus client 1 to 3, Modbus master 1 and 2,
DNS client, FTP client, mail client 1 to 3, and
time synchronization client settings.
* The DNS and IP address information can be saved,
but the information is not loaded.
Others: Event action, timer, match time, report, other (system),
Daylight Savings Time, color, graph scale, trip line,
message, display group, and other (display) settings.
File creation location: CONFIG folder on the CF card
Created le name: From the user function keys, SETTING.PNL.
An arbitrary le name can be set with the PNL extension from
communication commands or the browser
. The maximum number
of characters for the le name is 8 excluding the extension.
5.2 Main Module (MW100-E) Specifications